YARR DAQ "FELIX" Workstation with 1 Spec PCIe card in Lab C

This was set-up using an old "FELIX" workstation from Matthias' office (Zijun & Sanha, April 21st, 2021).

It is currently set up to run a RD53A module—the one Zijun has worked on previously.

It is accessible via machine name felix2 from rddev111.

It

Device	Photos
PC	Image Added "FELIX" Workstation (taken from Matthias' office)
DAQ Card	Image Added YARR DAQ (Trenz TEF 1001-02) card & Ohio State Adapter card connected to the PC In: PCIe 3.0 / Out: Mini-Displayport Image Added The card is connected to the `CPU SLOT6 PCI-E 3.0 X16` slot of the PC
RD53A Module	Image Added RD53A module is connected to the DAQ system for testing & GUI development purposes. (Note that this is the module that Zijun has worked on previously, and there are some non-trivial caveats regarding its data transmission.)

Space shortcuts