Page History
...
2) sample-to-detector distance
3) detector plane tilts.
2020-06-25 New Optical Metrology
Code Block | ||||
---|---|---|---|---|
| ||||
Hi Philip, Chris, and Mikhail,
My apologies for not getting this to you sooner.
Additional apologies in that the order we took the measurements in
is rotated from our "standard" and we were unable to set the origin
to zero. In the picture the XPP mounting bars on on the left side and
so this would be UP.
A map of the sensor corners measurement ordering and the quad
number locations is attached along with a picture of the setup. The
origin (not 0-0-0) is in the upper left of the picture.
Along with the Excel spreadsheet.
Please ask questions as I know this can be confusing.
Thanks,
Chris |
References
- EPIX10KA
- Jungfrau and Epix10ka Calibration
- Detector alignment tool
- /reg/g/psdm/detector/alignment/epix10ka2m/calib-mfx-epix10ka2m-01-2018-11-15
Overview
Content Tools