Page History
Content
| Table of Contents |
|---|
Optical measurements
- 2013-12-20-Quad-MEC-Metrology.xlsx - file with optical measurements from Gabriel
- 2013-12-20-Quad-MEC-Metrology.txt - text version of the same file
- 2013-12-20-Quad-MEC-Metrology-corr.txt - corrected file (see next section for details)
This time metrology file has all coordinates in mm (milimeters with rounding up to 10 um...
Quality check
Quality check table for original metrology file
| Code Block |
|---|
pair: S1 S2 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL) dz3(um) Quad 0 pair: 0 20910 20910 -180 -180 43550 43540 90 80 -0.00413 -0.23684 48304 48306 -2 0 10 99.997 pair: 1 20920 20920 -200 -200 43560 43630 10 80 -0.00459 -0.26285 48309 48401 -92 0 -70 100.033 pair: 2 20910 20100 10 820 43550 43540 10 0 0.00011 0.00658 47960 48305 -345 -810 10 1724.336 pair: 3 20910 20900 -140 -130 43540 43530 -60 -70 -0.00310 -0.17767 48294 48294 0 -10 10 9.995 pair: 4 20900 20910 -220 -210 43540 43550 90 100 -0.00494 -0.28289 48296 48311 -15 -10 -10 -69.579 pair: 5 20920 20900 40 20 43200 43550 -20 330 0.00069 0.03968 48304 47999 305 20 -350 34.059 pair: 6 20910 20910 -130 -130 43530 43540 -70 -60 -0.00299 -0.17109 48294 48298 -4 0 -10 0.002 pair: 7 20910 20909 -130 -129 43540 43540 -60 -60 -0.00297 -0.17041 48302 48298 4 -1 0 -30.000 |
Applied corrections
- pair 1: Correction to point 2: x+0.07mm; 0.01 → 0.08
- pair 2: Correction to point 16: x−0.8mm; 44.63 → 43.83
- pair 5: Correction to point 24: x+0.35mm; 90.62 → 90.97
Gabriel Blaj reported that "Z deviations larger than ~150 micron are typos, or the metrology microscope focussing on the wrong surface. Please use the other 3 and assume a
flat surface to extrapolate the real Z". So, we apply Z correction:
- point 13 Z=−1.76 → 0
- point 17 Z=−1.75 → 0
- point 18 Z=−1.80 → 0
- point 21 Z=−1.76 → 0
- point 22 Z=−1.75 → 0
Quality check table for corrected metrology file in X-Y
| Code Block |
|---|
segm: S1 S2 dS1 dS2 L1 L2 dL1 dL2 angle(deg) D1 D2 dD d(dS) d(dL) Quad 0 segm: 0 -20910 -20910 -180 -180 43540 43550 -90 -80 -0.23684 48306 48304 2 0 -10 segm: 1 -20920 -20920 -200 -200 43560 43560 -80 -80 -0.26306 48338 48309 29 0 0 segm: 2 -20100 -20110 20 10 -43540 -43550 0 -10 0.01974 47960 47964 -4 10 10 segm: 3 -20900 -20910 -130 -140 -43530 -43540 70 60 -0.17767 48294 48294 0 10 10 segm: 4 20910 20900 220 210 -43540 -43550 100 90 -0.28289 48311 48296 15 10 10 segm: 5 20900 20920 -40 -20 -43550 -43550 -20 -20 0.03947 48314 48304 10 -20 0 segm: 6 -20910 -20910 -130 -130 -43540 -43530 60 70 -0.17109 48294 48298 -4 0 -10 segm: 7 -20909 -20910 -129 -130 -43540 -43540 60 60 -0.17041 48302 48298 4 1 0 |
Quality check table for corrected metrology file in Z
| Code Block |
|---|
2015-03-05 14:32:33 (info) CalibManager.GUIMetrology: Quality check in Z: segm: SA LA XSize YSize dZS1 dZS2 dZL1 dZL2 dZSA dZLA ddZS ddZL dZX dZY angXZ(deg) angYZ(deg) dz3(um) Quad 0 segm: 0 -20910 43545 43545 20910 -90 10 -90 10 -40 -40 -100 -100 -40 -40 -0.05263 -0.10960 99.997 segm: 1 -20920 43560 43560 20920 -40 60 -80 20 10 -30 -100 -100 -30 10 -0.03946 0.02739 100.000 segm: 2 -20105 -43545 20105 43545 50 10 10 -30 30 -10 40 40 30 -10 0.08549 -0.01316 39.998 segm: 3 -20905 -43535 20905 43535 0 -10 10 0 -5 5 10 10 -5 5 -0.01370 0.00658 9.995 segm: 4 20905 -43545 43545 20905 20 0 40 20 10 30 20 20 30 10 0.03947 0.02741 -20.009 segm: 5 20910 -43550 43550 20910 -10 0 20 30 -5 25 -10 -10 25 -5 0.03289 -0.01370 10.000 segm: 6 -20910 -43535 20910 43535 10 10 -10 -10 10 -10 0 0 10 -10 0.02740 -0.01316 0.002 segm: 7 -20909 -43540 20909 43540 -20 10 -30 0 -5 -15 -30 -30 -5 -15 -0.01370 -0.01974 -30.000 |
Constants
2015-03-05 14:32:33 (info) CalibManager.GUIMetrology: parameters of type "center":
| Code Block |
|---|
199.76 198.51 307.20 98.55 628.98 629.41 711.43 498.54 199.76 198.51 307.20 98.55 628.98 629.41 711.43 498.54 199.76 198.51 307.20 98.55 628.98 629.41 711.43 498.54 199.76 198.51 307.20 98.55 628.98 629.41 711.43 498.54 306.45 94.25 623.52 624.25 513.94 726.85 198.35 199.14 306.45 94.25 623.52 624.25 513.94 726.85 198.35 199.14 306.45 94.25 623.52 624.25 513.94 726.85 198.35 199.14 306.45 94.25 623.52 624.25 513.94 726.85 198.35 199.14 -0.05 -0.14 0.00 -0.07 -0.14 -0.11 -0.09 -0.16 -0.05 -0.14 0.00 -0.07 -0.14 -0.11 -0.09 -0.16 -0.05 -0.14 0.00 -0.07 -0.14 -0.11 -0.09 -0.16 -0.05 -0.14 0.00 -0.07 -0.14 -0.11 -0.09 -0.16 |
2015-03-05 14:32:33 (info) CalibManager.GUIMetrology: parameters of type "tilt":
| Code Block |
|---|
-0.23684 -0.26306 0.01974 -0.17767 -0.28289 0.03947 -0.17109 -0.17041 -0.23684 -0.26306 0.01974 -0.17767 -0.28289 0.03947 -0.17109 -0.17041 -0.23684 -0.26306 0.01974 -0.17767 -0.28289 0.03947 -0.17109 -0.17041 -0.23684 -0.26306 0.01974 -0.17767 -0.28289 0.03947 -0.17109 -0.17041 |
2015-03-05 14:32:33 (info) CalibManager.GUIMetrology: parameters of type "geometry":
| Code Block |
|---|
# TITLE Geometry parameters of CSPAD # DATE_TIME 2015-03-05 14:32:33 PST # METROLOGY /reg/g/psdm/detector/alignment/cspad/calib-mec-2013-12-20/2013-12-20-Quad-MEC-Metrology-corr.txt # AUTHOR dubrovin # EXPERIMENT MEC # DETECTOR CSPAD # CALIB_TYPE geometry # COMMENT:01 Table contains the list of geometry parameters for alignment of 2x1 sensors, quads, CSPAD, etc # COMMENT:02 All translation and rotation pars of the object are defined w.r.t. parent object Cartesian frame # PARAM:01 PARENT - name and version of the parent object # PARAM:02 PARENT_IND - index of the parent object # PARAM:03 OBJECT - name and version of the object # PARAM:04 OBJECT_IND - index of the new object # PARAM:05 X0 - x-coordinate [um] of the object origin in the parent frame # PARAM:06 Y0 - y-coordinate [um] of the object origin in the parent frame # PARAM:07 Z0 - z-coordinate [um] of the object origin in the parent frame # PARAM:08 ROT_Z - object design rotation angle [deg] around Z axis of the parent frame # PARAM:09 ROT_Y - object design rotation angle [deg] around Y axis of the parent frame # PARAM:10 ROT_X - object design rotation angle [deg] around X axis of the parent frame # PARAM:11 TILT_Z - object tilt angle [deg] around Z axis of the parent frame # PARAM:12 TILT_Y - object tilt angle [deg] around Y axis of the parent frame # PARAM:13 TILT_X - object tilt angle [deg] around X axis of the parent frame # HDR PARENT IND OBJECT IND X0[um] Y0[um] Z0[um] ROT-Z ROT-Y ROT-X TILT-Z TILT-Y TILT-X QUAD:V1 0 SENS2X1:V1 0 21957 33685 -5 0 0 0 -0.23684 -0.05263 -0.10960 QUAD:V1 0 SENS2X1:V1 1 21820 10360 -15 0 0 0 -0.26306 -0.03946 0.02739 QUAD:V1 0 SENS2X1:V1 2 33767 68537 0 270 0 0 0.01974 0.08549 -0.01316 QUAD:V1 0 SENS2X1:V1 3 10832 68617 -7 270 0 0 -0.17767 -0.01370 0.00658 QUAD:V1 0 SENS2X1:V1 4 69137 56492 -15 180 0 0 -0.28289 0.03947 0.02741 QUAD:V1 0 SENS2X1:V1 5 69185 79895 -12 180 0 0 0.03947 0.03289 -0.01370 QUAD:V1 0 SENS2X1:V1 6 78200 21802 -10 270 0 0 -0.17109 0.02740 -0.01316 QUAD:V1 0 SENS2X1:V1 7 54799 21890 -17 270 0 0 -0.17041 -0.01370 -0.01974 QUAD:V1 1 SENS2X1:V1 0 21957 33685 -5 0 0 0 -0.23684 -0.05263 -0.10960 QUAD:V1 1 SENS2X1:V1 1 21820 10360 -15 0 0 0 -0.26306 -0.03946 0.02739 QUAD:V1 1 SENS2X1:V1 2 33767 68537 0 270 0 0 0.01974 0.08549 -0.01316 QUAD:V1 1 SENS2X1:V1 3 10832 68617 -7 270 0 0 -0.17767 -0.01370 0.00658 QUAD:V1 1 SENS2X1:V1 4 69137 56492 -15 180 0 0 -0.28289 0.03947 0.02741 QUAD:V1 1 SENS2X1:V1 5 69185 79895 -12 180 0 0 0.03947 0.03289 -0.01370 QUAD:V1 1 SENS2X1:V1 6 78200 21802 -10 270 0 0 -0.17109 0.02740 -0.01316 QUAD:V1 1 SENS2X1:V1 7 54799 21890 -17 270 0 0 -0.17041 -0.01370 -0.01974 QUAD:V1 2 SENS2X1:V1 0 21957 33685 -5 0 0 0 -0.23684 -0.05263 -0.10960 QUAD:V1 2 SENS2X1:V1 1 21820 10360 -15 0 0 0 -0.26306 -0.03946 0.02739 QUAD:V1 2 SENS2X1:V1 2 33767 68537 0 270 0 0 0.01974 0.08549 -0.01316 QUAD:V1 2 SENS2X1:V1 3 10832 68617 -7 270 0 0 -0.17767 -0.01370 0.00658 QUAD:V1 2 SENS2X1:V1 4 69137 56492 -15 180 0 0 -0.28289 0.03947 0.02741 QUAD:V1 2 SENS2X1:V1 5 69185 79895 -12 180 0 0 0.03947 0.03289 -0.01370 QUAD:V1 2 SENS2X1:V1 6 78200 21802 -10 270 0 0 -0.17109 0.02740 -0.01316 QUAD:V1 2 SENS2X1:V1 7 54799 21890 -17 270 0 0 -0.17041 -0.01370 -0.01974 QUAD:V1 3 SENS2X1:V1 0 21957 33685 -5 0 0 0 -0.23684 -0.05263 -0.10960 QUAD:V1 3 SENS2X1:V1 1 21820 10360 -15 0 0 0 -0.26306 -0.03946 0.02739 QUAD:V1 3 SENS2X1:V1 2 33767 68537 0 270 0 0 0.01974 0.08549 -0.01316 QUAD:V1 3 SENS2X1:V1 3 10832 68617 -7 270 0 0 -0.17767 -0.01370 0.00658 QUAD:V1 3 SENS2X1:V1 4 69137 56492 -15 180 0 0 -0.28289 0.03947 0.02741 QUAD:V1 3 SENS2X1:V1 5 69185 79895 -12 180 0 0 0.03947 0.03289 -0.01370 QUAD:V1 3 SENS2X1:V1 6 78200 21802 -10 270 0 0 -0.17109 0.02740 -0.01316 QUAD:V1 3 SENS2X1:V1 7 54799 21890 -17 270 0 0 -0.17041 -0.01370 -0.01974 CSPAD:V1 0 QUAD:V1 0 -4500 -4500 0 90 0 0 0.00000 0.00000 0.00000 CSPAD:V1 0 QUAD:V1 1 -4500 4500 0 0 0 0 0.00000 0.00000 0.00000 CSPAD:V1 0 QUAD:V1 2 4500 4500 0 270 0 0 0.00000 0.00000 0.00000 CSPAD:V1 0 QUAD:V1 3 4500 -4500 0 180 0 0 0.00000 0.00000 0.00000 |
Alignment check with rings
Left plot is from Zhou e-mail obtained with constants for MecTargetChamber.0:Cspad.0 from 2013-12-10
Right plot is generated with latest available optical measurement for MecTargetChamber.0:Cspad.0 from 2013-12-20 (different date and corrections to measurements were applied).
Geometry parameters
Parameters for center, tilt, and geometry are available in
Archive: /reg/g/psdm/detector/alignment/cspad/calib-mec-2013-12-20/calib/
Deployment: /reg/d/psdm/mec/mecf9615/calib/?
Summary
- X coordinates are corrected for points 2, 16, 24
- Z coordinate is corrected for points 13, 17, 18, 21, 22
- After that all deviations are ~10um.
References
Overview
Content Tools