...
For each task and each dataset below, it's important to understand what the AFEE board temperatures are. There are reported in the LISOC data monitoring. See instructions in the next section. Compare to the AFEE temperatures during Observatory cold thermal balance, when the LAC calibration data were acquired.
| No Format |
|---|
The CAL AFEE temperatures can be displayed on the [Telemetry Trending|http://glast-ground.slac.stanford.edu/TelemetryTrending/] -> Health and Safety -> Calorimeter and pick the LHKT#CALAF## value you need where # is the tower number (in Hex) and ## is 0 = X+, 1 = Y+, |
...
2 = X-, ..... Beware: this page looked different last week so the way to access these variables might change too. |
...
If you want to grab the temperatures with a command line go to the [ISOC utilities|https://confluence.slac.stanford.edu/display/ISOC/Utilities] and use the MnemRet.py script. |
1. From the initial LPA runs, determine whether there are any serious problems with zero suppression or CAL triggering.
...