Page History

...

12:45pm
Wrapped all mSAS cables with kapton tape. Only wrap the parts that cover the FEB plate plus a little extra. The other side needs to be protected by a sleeve, e.g. Halar. 

1215-02-08

* All FEB's sync all hybrids!

====================================================
Physical FEB: 1t Serial: FebFpga: 11 Control/Data Fiber D/H Flange: 3
====================================================
DPM 7, DP 0, Hybrid 3, All sync fine
DPM 7, DP 1, Hybrid 2, All sync fine
DPM 7, DP 2, Hybrid 1, All sync fine
DPM 8, DP 0, Hybrid 0, All sync fine
====================================================

====================================================
Physical FEB: 2-3t Serial: FebFpga: 2 Control/Data Fiber C/G Flange: 2
====================================================
DPM 11, DP 0, Hybrid 3, All sync fine
DPM 11, DP 1, Hybrid 2, All sync fine
DPM 11, DP 2, Hybrid 1, All sync fine
DPM 12, DP 0, Hybrid 0, All sync fine
====================================================

====================================================
Physical FEB: 4t Serial: FebFpga: 6 Control/Data Fiber A/E Flange: 0
Physical FEB: 4t Serial: FebFpga: 1 Control/Data Fiber C/G Flange: 2 (after switch)
====================================================
DPM 12, DP 1, Hybrid 3, All sync fine
DPM 12, DP 2, Hybrid 2, All sync fine
DPM 13, DP 0, Hybrid 1, All sync fine
DPM 13, DP 1, Hybrid 0, All sync fine
====================================================
* Connected high speed cable and powered up. The currents are as follows:
- DIGI: 1.129 A
- ANAP: 1.207 A
- ANAN: .231
* The FEB has a control link but it has several errors. The high speed cable
needs to be switched to a different flange channel.
* Switching the on the flange card didn't resolve the control link errors
present on the flange channel.
* Switched the high speed cable to Flange 2 and control link was fine
====================================================

====================================================
Physical FEB: 5t Serial: FebFpga: 7 Control/Data Fiber A/E Flange: 0
====================================================
DPM 5, DP 1, Hybrid 3, All sync fine
DPM 5, DP 2, Hybrid 2, All sync fine
DPM 6, DP 0, Hybrid 1, Initially saw no sync, after power cycling and
switching hybrids at the crossover, all sync fine.
All that was really required was a power cycle.
DPM 6, DP 1, Hybrid 0, All sync fine
====================================================
* Connected high speed cable and powered up. The currents are as follows:
- DIGI: 1.112 A
- ANAP: 1.173 A
- ANAN: .257
* Connected the hybrids and tried to run through CODA. Ran into the
same issues as before where we can't connect to the DPM's when not
logged in as Ryan.
====================================================

====================================================
Physical FEB: 6t Serial: FebFpga: 8 Control/Data Fiber A/E Flange: 0
====================================================
DPM 4, DP 0, Hybrid 3, All sync fine
DPM 4, DP 1, Hybrid 2, All sync fine
DPM 4, DP 2, Hybrid 1, All sync fine
DPM 5, DP 0, Hybrid 0, All sync fine
====================================================

====================================================
Physical FEB: 1b Serial: FebFpga: 9 Control/Data Fiber D/H Flange: 3
====================================================
DPM 10, DP 0, Hybrid 3, All sync fine
DPM 10, DP 1, Hybrid 2, All sync fine
DPM 10, DP 2, Hybrid 1, All sync fine
DPM 9, DP 2, Hybrid 0, All sync fine
====================================================

====================================================
Physical FEB: 2-3b Serial: FebFpga: 0 Control/Data Fiber C/G Flange: 2
====================================================
DPM 10, DP 3, Hybrid 3, All sync fine
DPM 12, DP 3, Hybrid 2, All sync fine
DPM 13, DP 2, Hybrid 1, All sync fine
DPM 8, DP 3, Hybrid 0, All sync fine
====================================================

====================================================
Physical FEB: 4b Serial: FebFpga: 5 Control/Data Fiber B/F Flange: 1
====================================================
DPM 0, DP 0, Hybrid 3, All sync fine
DPM 0, DP 1, Hybrid 2, All sync fine
DPM 0, DP 2, Hybrid 1, All sync fine
DPM 1, DP 0, Hybrid 0, All sync fine
====================================================
* After power up, tried to write config and there was an error. Power
cycling the FEB didn't help. Restarting the control
server fixed the issue.
====================================================

====================================================
Physical FEB: 5b Serial: FebFpga: 4 Control/Data Fiber B/F Flange: 1
====================================================
DPM 1, DP 1, Hybrid 3, All sync fine
DPM 1, DP 2, Hybrid 2, All sync fine
DPM 2, DP 0, Hybrid 1, All sync fine
DPM 2, DP 1, Hybrid 0, All sync fine
====================================================
* Connected high speed cable and powered up. The currents are as follows:
- DIGI: 1.120 A
- ANAP: 1.160 A
- ANAN: .254
====================================================

====================================================
Physical FEB: 6b Serial: FebFpga: 3 Control/Data Fiber B/F Flange: 1
====================================================
DPM 2, DP 2, Hybrid 3, All sync fine
DPM 3, DP 0, Hybrid 2, All sync fine
DPM 3, DP 1, Hybrid 1, All sync fine
DPM 3, DP 2, Hybrid 0, All sync fine
====================================================