...
particle | energy | trigger | events | purpose | mode |
---|---|---|---|---|---|
e | 2.5 | S2+S4+NOSh+C1+C2 | 100K | increase statistics for tagged photons | with same CU configuration, change trigger |
None | none |
|
| pedestal run for CAL | CU BT22 |
e | 2.5 | S2 S2+NOSh+C1+C2 | 100K | e calibration | same same CU configuration, magnet off, e trigger |
e | 1 | S2+NOSh+C1+C2 | 100K | 1GeV e in the CU for calibration | magnet off; check position of beam wrt to dump |
e | 0.5 | S2+NOSh+C1+C2 | 10K | 0.5 GeV e in the CU for calibration | magnet off |
e | 1 | S2+S4+NOSh+C1+C2 | 200K | 1 GeV photon tagged | magnet on at scaled current (240A - CHECK current-BL calibration); collect runs of 25K evts each |
e | 1 | S2+S4+NOSh+C1+C2 | 200K | 1 1 GeV photon tagged - configuration 2 | magnet on at scaled current (240A - CHECK current-BL calibration); collect runs of 25K evts each |
e | 1 | S2+NOSh+C1+C2+Sback | 10K | test to redefine full-brem photon trigger to maximize efficiency | add Sback after tagger and in trigger, take data with no AD |
e | 1 | S2+NOSh+C1+C2 | 10k | test to get full-brem+AD | read sync AD but full-brem trigger; test data readout rate and synchronization |
e | 2.5 | S2+NOSh+C1+C2 | 10k | check position after changing beam | magnet off, |
e | 2.5 | S2+NOSh+C1+C2(Sback?) |
| full brem at 2.5GeV - configuration 2 | NON synchronized with AD; scan the next position of the CU (TBD) |
|
|
|
|
|
|