...
particle | energy | trigger | events | purpose | mode | ||||
---|---|---|---|---|---|---|---|---|---|
e | 2.5 | S2+S4+NOSh+C1+C2 |
| complete full brem program at 2.5GeV | 100K | increase statistics for tagged photons | with same CU configuration, change trigger collect up to 2.4M evts combining with owl shift runs - same CU configuration | ||
e | 2.5 | S2+S4 S2+NOSh+C1+C2 | 100K | increase statistics for tagged photons | e calibration | same with same CU configuration, magnet off, change e trigger | |||
e | 1 | S2+NOSh+C1+C2 | 10K 100K | 1GeV e in the CU for calibration | magnet off; check position of beam wrt to dump | ||||
e | 0.5 | S2+NOSh+C1+C2 | 10K | 0.5 GeV e in the CU for calibration | magnet off | ||||
e | 1 | S2+S4+NOSh+C1+C2 | 200K | 1 GeV photon tagged | magnet on at scaled current (240A); collect runs of 25K evts each | ||||
e | 1 | S2+S4+NOSh+C1+C2 | 200K | 1 GeV photon tagged - configuration 2 | magnet on at scaled current (240A); collect runs of 25K evts each | ||||
e | 1 | S2+NOSh+C1+C2+Sback | 10K | test to redefine full-brem photon trigger to maximize efficiency | add Sback after tagger and in trigger, take data with no AD | ||||
e | 1 | S2+NOSh+C1+C2 | 10k | test to get full-brem+AD | read sync AD but full-brem trigger; test data readout rate and synchronization | ||||
e 1 | 2.5 | S2+NOSh+C1+C2 (Sback?) |
| full brem at 1GeV | collect 2.4 M evts in 250K runs | ||||
|
|
|
|
|
| ||||
10k | check position after changing beam | magnet off, | |||||||
e |
| e | 2.5 | S2 S2+S4+NOSh+C1+C2(Sback?) | 100K | photon tagging |
| full brem at 2.5GeV - configuration 2 | NON synchronized with AD; scan the 6 positions next position of the CU as posted next to the XYtable (TBD) |
e | 2.5 | S1+S2+NOSh+C1+C2 | 2.4M | full-brem |
| NON synchronized with AD; scan the 6 positions of the CU as posted next to the table |