...
particle | energy | trigger | events | notes | purpose | mode | |
---|---|---|---|---|---|---|---|
e | 2.5 | S2+NOSh+C1+C2 |
| complete full brem program at 2.5GeV | collect up to 2.4M evts combining with owl shift runs - same CU configuration | ||
e | 2. | e | 2.5 | S2+S4+NOSh+C1+C2 | 100K | increase statistics for tagged photons | with same CU configuration, change trigger |
e | 1 | S2+NOSh+C1+C2 | 10K | 1GeV e in the CU for calibration | magnet off | ||
e | 0.5 | S2+NOSh+C1+C2 | 10K | 0.5 GeV e in the CU for calibration | magnet off | ||
e | 1 | S2+S4+NOSh+C1+C2 | 200K | 1 GeV photon tagged | magnet on at scaled current (240A); collect runs of 25K evts each | ||
e | 1 | S2+NOSh+C1+C2+Sback | 10K | test to redefine full-brem photon trigger to maximize efficiency | add Sback after tagger and in trigger, take data with no AD | ||
e | 1 | S2+NOSh+C1+C2 | 10k | test to get full-brem+AD | read sync AD | 100k | synchronized with AD but full-brem trigger; test data readout rate and synchronization |
e | 1 | S2+NOSh+C1+C2(Sback?) |
| full brem at 1GeV | collect 2.4 M evts in 250K runs | ||
|
|
|
|
|
| ||
e | 2.5 | S2+S4+NOSh+C1+C2 | 100K | photon tagging | synchronized with AD; scan the 6 positions of the CU as posted next to the XYtable | ||
e |
| S1+S2+NOSh+C1+C2 | 2.4M | full-brem | NON synchronized with AD; full-brem run; scan the 6 positions of the CU as posted next to the table |