Page History

...

1. Connect to the server:

   Code Block
   ssh ioc-tst-cam5

2. Run the startup command that contains EVR ioc in:

   Code Block
   sudo /reg/d/iocCommon/sioc/ioc-tst-cam5/startup.cmd

3. You should see with psproc:

   Code Block
   [paiser@ioc-xrt-xcscam04 ~ 12:18:20] psproc PID USER-ID SIOC COMMAND HOSTNAME PORT 4851 tstioc caRepeater procServ ioc-xrt-xcscam04 30000 5147 tstioc ioc-tst-cam5 procServ ioc-xrt-xcscam04 30001 5150 tstioc ioc-tst-cam5 procServ ioc-xrt-xcscam04 40000

In case you need to power cycle ioc-tst-cam5

 ipmitool -I lanplus -U ADMIN -P <you_should_know> -H ioc-tst-cam5-ipmi power status
 ipmitool -I lanplus -U ADMIN -P <you_should_know> -H ioc-tst-cam5-ipmi power reset
 

Where: <you_should_know> is the standard ipmi password that you_should_know...

...

XIP main GUI:
/reg/neh/home1/jsludvik/svn/trunk/ioc/xpp/xip_pp/current/motionScreens/xip_gui.sh

XPP motor GUIs:

/reg/g/pcds/package/epics/3.14/modules/pcds_motion/R2.3.4/launch-motor.sh XPP:TST:MMS:01

...

/reg/g/pcds/package/epics/3.14/modules/pcds_motion/R2.3.4/launch-motor.sh XPP:TST:MMS:02

...

/reg/g/pcds/package/epics/3.14/modules/pcds_motion/R2.3.4/launch-motor.sh XPP:TST:MMS:03

Startup.cmd:

/reg/d/iocCommon/sioc/ioc-xpp-trigger-ims/startup.cmd

Mode Descriptions

Mode 1: Single pulse
Mode 2: Continuous trigger

...