Page History

2-1

2012-06-05

Back from JLAB 5/25/12 – switch broken 6/5/12

2-2

DTM 2-7 (445F63)

DPM 2-7 (19D013)

2012-06-05

Back from JLAB 5/25/12, green health LED not lighting

2-3

DTM 2-8 (44555C)

DPM 2-10 (19DC05)

2012-06-05

3-1

DTM 2-6 (445D84)

DPM 2-6 (19C145)

2012-05-03

Freel slot 5; DTM 2-2, DPM 2-2; Blue LED doesn't light

3-2

2012-05-03

Keynot slot 5; DTM 2-4, DPMs 2-7

3-4

DTM 2-2 (44810B)

DPM 2-12 (198C40)

2012-06-05

3-5

DTM 2-4 (445FC5)

DPM 2-1 (197519)

2012-06-05

"No devices detected on the JTAG chain (6/4)" Fine (6/5)

2-1

000000197519

08:00:56:00:42:fc

917

prod 2.2, 1088:1104

rescue 2.2, 1088:1104

2012-05-31

OK

2-2

08:00:56:00:42:f7

917

prod 2.2, 1088:1104

rescue 2.2, 1088:1104

2012-05-31

OK

2-3

000000197DAD

08:00:56:00:42:f9

917

0.8.0

2012-05-03

Fails: peb 0 exception 0x8baec1 edw 0x5f transferred 0; EEPROM Read errors. XMD gives:

ERROR: Unable to STOP PowerPC Processor
	Check: (1) If the FPGA is Configured Correctly (or)
 	(2) If Processor Reset and Clock Ports are Connected Correctly

C103 scraped off.

2-4

00000019B108

08:00:56:00:42:XX

917

prod 2.2, 927M

rescue 2.2, 927M

2012-05-03

Programming f/w took two attempts; XMD 'dow'ing devel and 'con'ing causes crash to 0x700. XMD gives:

ERROR: Unable to STOP PowerPC Processor
	Check: (1) If the FPGA is Configured Correctly (or)
 	(2) If Processor Reset and Clock Ports are Connected Correctly

C76 and R22 scraped off.

2-5

08:00:56:00:42:f5

917

0.8.0

prod 2.2, 927M

rescue 2.2, 927M

2012-05-03

OK

2-6

08:00:56:00:42:fa

917

prod 2.2, 1088:1104

rescue 2.2, 1088:1104

2012-05-31

OK

2-7

08:00:56:00:42:f8

917

prod 2.2, 1088:1104

rescue 2.2, 1088:1104

2012-05-31

OK
C57 scraped off (2012/06/05)

2-8

000000196E67

Bad. XMD gives:

ERROR: Unable to STOP PowerPC Processor
	Check: (1) If the FPGA is Configured Correctly (or)
 	(2) If Processor Reset and Clock Ports are Connected Correctly

2-9

08:00:56:00:42:f4

917

prod 2.2, 927M

rescue 2.2, 927M

2012-05-03

OK

2-10

08:00:56:00:42:fb

917

prod 2.2, 927M

rescue 2.2, 927M

2012-05-03

OK

2-11

000000197D2F

08:00:56:00:42:XX

Mark says board is bad. XMD gives:

ERROR: Unable to STOP PowerPC Processor
	Check: (1) If the FPGA is Configured Correctly (or)
 	(2) If Processor Reset and Clock Ports are Connected Correctly

2-12

08:00:56:00:42:f6

917

prod 2.2, 927M

rescue 2.2, 927M

2012-05-03

OK