ID | Ser. No. | MAC | Firmware | EEPROM | System 0 | System 1 | Date | Notes |
---|
2-1 | | 08:00:56:00:42:fc
| 917 | | prod 2.2, 1088:1104 | rescue 2.2, 1088:1104 | 2012-05-31 | OK | 2-2 | | 08:00:56:00:42:f7
| 917 | | prod 2.2, 1088:1104 | rescue 2.2, 1088:1104 | 2012-05-31 | OK | 2-3 | | 08:00:56:00:42:f9
| 917 | 0.8.0 | | | 2012-05-03 | Fails: peb 0 exception 0x8baec1 edw 0x5f transferred 0; EEPROM Read errors | 2-4 | | 08:00:56:00:42:XX
| 917 | | prod 2.2, 927M | rescue 2.2, 927M | 2012-05-03 | Programming f/w took two attempts; XMD 'dow'ing devel and 'con'ing causes crash to 0x700 | 2-5 | | 08:00:56:00:42:f5
| 917 | 0.8.0 | prod 2.2, 927M | rescue 2.2, 927M | 2012-05-03 | OK | 2-6 | | 08:00:56:00:42:fa
| 917 | | prod 2.2, 1088:1104 | rescue 2.2, 1088:1104 | 2012-05-31 | OK | 2-7 | | 08:00:56:00:42:f8
| 917 | | prod 2.2, 1088:1104 | rescue 2.2, 1088:1104 | 2012-05-31 | OK | 2-8 | | | | | | | Bad | 2-9 | | 08:00:56:00:42:f4
| 917 | | prod 2.2, 927M | rescue 2.2, 927M | 2012-05-03 | OK | 2-10 | | 08:00:56:00:42:fb
| 917 | | prod 2.2, 927M | rescue 2.2, 927M | 2012-05-03 | OK | 2-11 | 000000197D2F | 08:00:56:00:42:XX
| | | | | | Mark says board is bad; XMD saysgives: {{ERROR: Unable to STOP PowerPC Processor Check: (1) If the FPGA is Configured Correctly (or) (2) If Processor Reset and Clock Ports are Connected Correctly}} | 2-12 | 08:00:56:00:42:f6
| 917 | | prod 2.2, 927M | rescue 2.2, 927M | 2012-05-03 | OK |
|