Page History

...

Cooling Block	Initial Squareness (<0.050 mm lean at top)	Max Rock (groove/flat - in)	Center Thickness (1/2/3/4 - mm)	Thickness Range (max-min - mm)	Height After Machining at pins (back/front - mm)	Module
100-1	Pass	0.0005	?	0.005	52.451/52.451	Module ?
100-2	Fail - lapped	0.0005	?	0.008	52.451/52.451	Module ?
100-3	Fail - lapped	0.0005	?	0.013	52.451/52.451	Module ?
100-4	Pass	0.0005	?	0.003	52.451/52.451	Module ?
100-5	Pass	0.0005	?	0.005	52.451/52.451	Module ?
100-6	Pass	0.0005	?	0.008	52.451/52.451	Module ?
100-7	Pass	0.0005	?	0.008	52.451/52.451	Module ?
100-8	Pass	0.0005	?	0.008	52.451/52.451	Module ?
100-9	Pass	0.0005	?	0.010	52.451/52.451	Module ?
100-10	Pass	0.0005	?	0.010	52.451/52.451	Module ?

...

Cooling Block	Initial Squareness (<0.050 mm lean at top)	Max Rock (groove/flat - in)	Center Thickness (1/2/3/4 - mm)	Thickness Range (max-min - mm)	Height After Machining at pins (back/front - mm)	Module
50-1	Fail - lapped	0.0/0.0	?	0.008	50.851/50.851	Module ?
50-2	Fail - lapped	0.0/0.0	?	0.010	50.851/50.825	Module ?
50-3	Fail - lapped	0.0/0.0	?	0.008	50.851/50.825	Module ?
50-4	Pass	0.0005/0.0005	?	0.010	50.825/50.800	Module ?
50-5	Pass	0.0005/0.0005	?	0.008	50.851/50.825	Module ?
50-6	Pass	0.001/0.0005	?	0.010	50.851/50.825	Module ?

Search/Navigation: