TODO: Brief introduction to the project describing the why and the how.
Table of contents
Requirements
| Document type | Link |
|---|---|
| PRD | LCLSII-HE-1.4-PR-0280.docx (Convers SparkPix-S and SparkPix-2M) |
| IRD | |
| ICD | DXS: Not found |
Data systems: LCLSII-HE-1.4-IC-0499.docx | |
CXI (LFAD is ePixUHR 4MPix; SFAD is SparkPix-S): LCLSII-HE-1.4-IR-0880.docx | |
| FRD | Detector team needs to create it. See example below for the ePixUHR |
| ESD | Detector team needs to create it. See example below for the ePixUHR |
Context: DXS is the primary beamline where this detector will be used therefore its reequipments are considered when designing the SparkPix-S 1x4. The expected beam will be spited into two and a sketch of its dimensions when interacting with the detector is depicted below
Beam concept at the detector
Draft on the concept of beam interaction with the 1x4 carrier. Detector will be pivoted around the center axis, effectively reducing the pixel size. Vibration calculations should be analyzed considering the effective pixel size (10um)
Sensor Design
- Pixel pitch is 50um
- 1mm is the baseline but Hassan has suggested that they may want to have 500um thick sensors two
Design files
TBD
Summary table
| Full sensor | Lower left corner | Between two ASICs at the bottom | Lower right corner | Between ASICs in the middle | Top left corner | Top right corner | |
|---|---|---|---|---|---|---|---|
| Image | |||||||
| Measurements |
|
|
|
|
|
|
|
Review date:
ASIC Design
Documentation
SparkPix-S (XPCS) complete documentation has restricted access.
Summary table
| Full matrix | Lower left corner | Lower right corner | |
|---|---|---|---|
| Image | |||
| Measurements |
|
|
|
Review date:
Platform
The SparkPix-S 1x4 detector is very similar to the GT readout platform and therefore we will reuse it extent possible. For examle, the digital and analog boards are 100% compatible. The carrier boards and mechanical design will need to be adapted.
100kfps DAQ support system - GT Readout Platform
- Key requirements when designing the board
- Sensor aligned with rotation axis
Carrier board
SparkPix-S 1x4 implementation
| Multi-board project | Carrier Board | |
|---|---|---|
| 3D view |
| TODO |
| Description | A configuration of the GT Readout Platform with a 1x4 carrier of SparkPix-S ASICs. | Carrier board for a 1x4 configuration of SparkPix-S ASICs for use with the GT Readout Platform |
| Altium 365 project | https://stanford-linear-accelerator-center.365.altium.com/designs/97303243-7476-464D-8044-63CC0E2FD9C0 | https://stanford-linear-accelerator-center.365.altium.com/designs/B1145EE9-2A02-4B88-9339-D6492F047ABF |
| Board tracking | GT Readout ASICs | PC_261_101_46_C00 |
Review date:
(Similar board) - ePixUHR100k 1x4 implementation
| Multi-board project | Carrier Board | |
|---|---|---|
| 3D view |
|
|
| Description | A configuration of the GT Readout Platform with a 1x4 and 4x1 carrier of ePixUHR100k ASICs. | Carrier board for a 1x4 configuration of ePixUHR100k ASICs for use with the GT Readout Platform |
| Altium 365 project | https://stanford-linear-accelerator-center.365.altium.com/designs/32095811-C026-416E-BB99-40FCF4FA87F6 | https://stanford-linear-accelerator-center.365.altium.com/designs/F5AB04C2-2ADF-42DF-B87B-5C40051BA7FC |
| Board tracking | GT Readout ASICs | PC_261_101_42_C00 |
Mechanical
- Key requirements
- CO2 cooled
- 0 degree for cooling pipe and electronics board
- in-vacuum
- Clamping can be on the back side of the detector
- Vibration specs (usually 10% of the pixel at the angle)
- Light shield needed (at least the frame designed)
Design
Mechanical design files
Drawings with key dimensions
Review date:
Meetings
- 07/2024 - Supporting presentations
Project Management
Key upcoming milestones
- Preliminary Design Review for the SparkPix-S 1x4: 02/2025 (request pending due to project baseline)
- Preliminary Design Review for the SparkPix-S 2MPix: 02/2025 (request pending due to project baseline)
Jira project (sharing with Gt readout platform due to reuse)
Overview
Content Tools