## After building the Rogue software engine, go to the software base directory:
## If you have access to SLAC AFS and running C Shell:
$ source setup_template.csh
## If you have access to SLAC AFS and running BASH Shell:
$ source setup_template.sh
setup_template.csh/setup_template.sh
This setup_template.csh/setup_template.sh are examples of all the software dependencies required to build the software and what environments variables need to be setup.
## Build the base software:
$ make
## Go to the software base directory:
## If you have access to SLAC AFS and running C Shell:
$ source setup_template.csh
## If you have access to SLAC AFS and running BASH Shell:
$ source setup_template.sh
setup_template.csh/setup_template.sh
This setup_template.csh/setup_template.sh are examples of all the software dependencies required to build the software and what environments variables need to be setup.
## Launch the python GUI:
$ python3 scripts/FebGui.py 192.168.1.10
FebGui.py Usage
The FebGui.py script accepts one argument. If the argument is "PGP", the software will configure the communication for a PGP PCIe card. Else the software will use the argument for the IP address of the carrier board.
Dionisio Doering