Usage is: cob_cold_data_reset <rce address> [<rce_address> ...]
Send a Cold Data Reset command to a COB.
This command causes the same effect as physically removing the
COB from the slot except that Management Power is not removed.
Upon receiving this command, the IPMC will remove payload power
from all bays, clear all internal cached state informaion which
includes all Shelf IP Information and the Shelf Name, and then
resets the IPMC itself. If the conditions for activation are
satisfied (handle switch closed) the COB will proceed normally
exactly as if it had just been inserted in the shelf.
If you are just looking to refresh the cached Shelf information
in the IPMC, consider using the cob_refresh_shelf_info command.
Each <rce address> is of the form:
shelfmanager_ip[/slot[/bay[/rce]]]
Where:
shelfmanager_ip: the hostname of the shelf manager or its IP address
WARNING: THIS IS NOT THE SHELF NAME!
slot: the physical slot number (1-16)
or the case-insensitive keyword ALL
bay: the bay number (0-7)
or one of the case-insensitive keywords:
ALL, CMB, DTM, DPM, RTM, CEN
rce: the RCE number (0-3)
or the case-insensitive keyword ALL.
Leaving off the end of the address is the same
as using the keyword ALL for the omitted arguments.
Examples:
egbert-sm/4/3/2
egbert-sm/4/3
egbert-sm/4/
egbert-sm/
egbert-sm/4/ALL/2
egbert-sm/4/dpm
egbert-sm/4/DPM/0
172.21.6.112/4/3/2
For this command, the bay and rce portions of <rce_address> are ignored
Return Value:
0 if OK
1 Error