3.25.20 Workbook Planning Meeting

Draft Workbook

ASO-2 Qualification Workbook.pdf

AGENDA 

  1. List of deprecated items; get approval for removal.
  2. Updates
         *   (Peter's in-progress ASO2 workbook)
         *   Updates from Ops' ASO2 workbook review on 3.2
  3. Longer-term goals
         *   Consistent guidelines for sign-off
         *   Module format
         *   FACET-II Training
         *   LCLS-II Training.

3.24.20 First Pass Rework Meeting

Needs Approval

  • Removed A-line Operating Techniques
  • Removed FACET items:

    • Decode Hardware Status

    • Decode Software Status

    • Decode secondaries

    • Decode CAMAC Status (CSTA)

    • BPMs --> Create measurement definitions, measure tails with single wire scan displays

    • Wire Scanners --> Run wire loop macro

    • Timing --> TRIGs/TRBRs

  • Operating BPMs
    • Calibrate toroids?
    • Check/adjust BPM timing?
    • BSA line items are covered in 2.3
  • Use CMLOG?

Needs Update

  • Timing Section needs update to current system
  • Update 'LCLS Undulator, Dump, and FEE Operating Techniques' section (can we get a training/lecture from physicist?)
  • Spit Linac and LTU sections, resolve BTH/LTU naming mismatch
  • Update 'Profile Monitors' section. Most line items are deprecated.

  • Update 'Using the ACR Hardware and Software Displays and Control' section. Many items ASO1 or FACET or deprecated. 

  • Beam Transport System
    • Add new beamlines (CLTH, HXR/SXR (LTUH/S, UNDH/S, DMPH/S)
    • laser transport optics section rework
  • Add BSY section
    • beam switching (hardware, procedures, PLC junk)
    • 30-BSY
  • Instrumentation and Diagnostics
    • more BPM types
    • photon beam attenuation
    • new photon intensity monitors
    • TCAV and TREX
    • Add new stoppers
  • Update Control System Hardware
  • Update Using Control System to ASO2 level
  • Utilities (rename to Facilities?)
    • Sag/Swell power monitoring
    • PSPS
    • PPS backup battery
  • Make Vacuum system section more trainer-friendly
    • format inconsistent with other sections
    • list specific gauge, pump, etc. types as sub-bullets

Needs More Research

  • 2.1 Pockels Cell (is this actually what we use? should it be replaced?)
  • 2.2 Section is a lot more in depth than others. Should it be broken up? Can we substitute USPAS?
  • 3.2 Power Steering (does this mean Auto steering?)
  • 3.3 What are "timer parameters"? What are "other feedback parameters"?
  • 3.4 What is DSTA?
  • 3.5 What are TMVAs?
  • 3.6 Do we calibrate magnets?
  • 3.7 Buffered data acquisition = BSA or no? Do we adjust BPM timing? Creating measurement definitions (FACET maybe?)?
  • 3.8 Measuring tails?
  • 3.10 What is the CMLOG?
  • 3.11 What is the SDS CUD? What are "special displays"?




Link to current edition: https://docs.slac.stanford.edu/sites/pub/Publications/ASO-2%20Qualification%20Workbook.pdf

ASO-2 Qualification Workbook.pdf

Things to Remove

2.1 Beam Transport System > Solenoid Magnets > Lenses

4.1 A Line Operating Techniques




Things to Add

2.1 Beam Transport System > Beam Transport Lines > CLTH, HXR/SXR (LTUH/S, UNDH/S, DMPH/S)



Draft of the ASO-2 Workbook below:

  • No labels