2020-09-08 Detector Planning Meeting notes

Shift coverage this week.

• F 0730: LV95 (Schriber), @CXI JF4M, on-call
• F 0730: X421 (Diling) @XPP ??
• F 2100: LV60: (Reinhard) @XCS ??

• Wave8 testing/status?
• ePix10k
  • DAQ/IOC saga update?
  • 2m.1 in repair
  • Constants status/plan?
  • Charge-punch status?

• Baseline JF and 2M 'traveller' pages on Confluence.
  • Collect and analyze any remaining in-lab test data.
    • Next detector deployed: Kayla to lead meeting for mapping detectors to experiments

• Group priorities review:
  • Testing
    • Setup ePix10k, ePix100, JF smalls for test in lab (~there)
    • UED testing provision (meet 1430 today)
    • Baseline tests on smalls pre-deployment.
    • Parametric performance tests (10k first)
  • Analysis
    • Gather and process relevant commissioning data for Mp travellers on Confluence.
      • • Solid pedestals
        • Noise map
        • Response uniformity (mini-X cu-fluorescencce)
        • Bootstrap gain (sealed source)
        • Linearity (signal injection)
  • Documentation
    • Complete on-line travellers for Mp detectors
      
      
  • Development
    • RIXS-CCD, review draft Project Plan w/NEH 2.2
    • RIXS-CCD Concept Design (R to set meeting to talk cooling options)
    • Anton project at UCB/SSL (milestone/schedule revision received)
    • SXR Downselect prep
      
      
  • Lab 'commissioning'
    • DAQ
      
      • Storage nodes
      • LCLS I/II compatibility
    • Table seismic
    • Laser table re-cert
    • BIO for racks in chase
    • DP node purchase
    • Sealed source purchase (M&S evaporating)

Actions:

CH: (Are we ready tot fix dashed line issue in the hutches?)

• Charge injection scripts on 10k smalls for mask tests.

RA: (Are we on trac for Lin tests, and when to schedule him?)

• Loan stages to CXI....ensure return.
• Meet re cooling concepts...met with Jim re outside space: not much.

KP: JSA summary list circulated

• XPP/MFX/XCS fibers due this week, other wise need ugly solution.
• Small Rayonix testing can be done by others.
• XPP/XCS power cable pinout (controls needs to tell us MPOD working)

KN:

• UED Quad now running on our DAQ (LCLS-II)...no 2m when quad testing going on due to PDU channel limit.
• Replace PDU and cable in XPP to address 10A draw on Pix100
• XCS IOC: Immediately trips when IOC is running, suspect software problem but not fully isolated.
  
  

PH:

• Learning NERSC interface

• M&S Status (Through July)

• Labor snapshot (June actuals):
  
  
  

Coordinate/update lab schedule.