• Created by Unknown User (fewtrell), last modified on Dec 03, 2007

CalTupleAlg

CalTupleAlg generates CalTuple entries from TDS digi data. Current entries include:

  • CalXtalAdcPed[16][8][12][2]
    •  pedestal subtraced adc values per channel. (BESTRANGE)
  • CalXtalAdcRng[16][8][12][2]
    •  adc range selection per channel
  • CalXtalFaceSignal[16][8][12][2]
    • Signal @ each crystal face in units of MeV deposited at center of xtal

Each of the above branches is a multi-dimensional array matching CAL geometry ([16][8][12][2], representing tower, layer, xtal & xtal face respectively)

  • CalXtalAdcPedAllRange[16][8][12][2][4]
    • pedestal subtracted adc values for all adc channels (may be zero if data is not available). shape is [16][8][12][2][4] (last index represents ADC range.)
  • CalXtalFaceSignalAllRange[16][8][12][2][4]
    •  face signal for all adc channels (may be zero if data is not available). shape is [16][8][12][2][4] (last index represents ADC range.

Each of the above branches is a multi-dimensional array matching CAL geometry ([16][8][12][2][4], representing tower, layer, xtal, xtal face & adc range respectively) (adc range runs from LEX8=0 to HEX1=3)

jobOptions

  • CalTupleAlg.tupleName
    • override name of CalTuple tree. (default is "CalTuple")
  • CalTupleAlg.tupleFilename
    • optional name of CalTuple file. instructs ntupleWriterSvc to create CalTuple in it's own file instead of sharing the default file w/ other modules. The default ("") will use the shared file
  • CalCalibSvc CalCalibSvcspecifies
    • whichICalCalibSvcobject should be used byCalTupleAlg. default is "CalCalibSvc"

CalTuple only jobOptions file

can be found  in CalXtalResponse CVS

Up to Date Documentation 

find most recent documentation of CalTuple in CalXtalResponse doxygen here:

  • No labels