From digitization-v3r4p6_135005436_digi_DIGI.root and recon
Measured energy and best range selections
The energy returned for a Xtal is the geometric mean of the reconstructed energy for both sides of a Xtal. The energy from a + or - side can be reconstructed with either range 0 or range 1. this is the energy reconstructed from individual Xtals, where the different range selections show in different colors.
Range 0 is selected for low energy events including the muon peak. Around 100 MeV is a distribution of events where either range 0 or 1 is selected. Above 130 MeV range1 is selected for both ends.
Measured energy and ADC range 0
Here is the reconstructed energy vs ADC 0+ and this is the reconstructed energy vs ADC 0-. A few Xtals reconstruct energies below a MeV. A few pathological Xtals can be identified here:
- layer 0 column 5 tower 8
This is the Xtal that shows the horizontal stripes between 500 and 600 ADC counts in the second plot. Both ADC0+ and ADC1+ show unusual distributions.
Xtals with LAC set to 0 from Zach:
tower |
layer |
column |
face |
---|
3 |
3 |
5 |
0 |
0 |
1 |
8 |
1 |
10 |
1 |
5 |
1 |
11 |
5 |
10 |
1 |
2 |
0 |
3 |
1 |
8 |
0 |
5 |
1 |
Removing those Xtals yields this plot for ADC 0+ - the twisters are gone. As for ADC 0- there are still 2 twisters.