You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 38 Next »

Connection Details

Connection details should include:

  • Target chamber flange/feedthru
  • Controller ID and specific interface, e.g. card, port,...
  • Digi/moxa name and port (if used)
  • IOC
    • From IOC we will determine server and then rack location
  • Connection to server, e.g. ethernet, usb3, etc.

Motor Checklist

PurposeBase PVConnectionpmgrpython deviceCabled?Homed?
East_XMEC:PPL:MMN:17T5/*1,  XPS 3/1, 

ioc-mec-ppl-xps3

Newporteast_xYesYes
East_YMEC:PPL:MMN:18T5/*2,  XPS 3/2, 

ioc-mec-ppl-xps3

Newporteast_yYesYes
East_ZMEC:PPL:MMN:19T5/*3, XPS 3/3,

ioc-mec-ppl-xps3

Newporteast_zYesYes
West_XMEC:PPL:MMN:20T5/*4, XPS 3/4, 

ioc-mec-ppl-xps3

Newportwest_xYesYes
West_YMEC:PPL:MMN:21T5/*5, XPS 3/5, 

ioc-mec-ppl-xps3

Newportwest_yYesYes
West_ZMEC:PPL:MMN:22T5/*6, XPS 3/6, 

ioc-mec-ppl-xps3

Newportwest_zYesYes
VISAR_X

MEC:PPL:MMN:32

VacCable 9, T6/DB25-1, AirCable "XPS DelayStage", XPS 4/8, ioc-mec-ppl-xps4

Newport visar_xYesYes
VISAR_Y

MEC:PPL:MMN:31

VacCable 2, T6/DB25-2, AirCable "XPS2 #4", XPS 4/7, ioc-mec-ppl-xps4Newportvisar_yYesYes
VISAR_Z

MEC:PPL:MMN:28

VacCable 10, T6/5, AirCable "XPS2 #3/XPS2 #1", XPS 4/3, oc-mec-ppl-xps4

Newportvisar_zYesYes
Zyla_500mmMEC:PPL:MMN:08in-air to beam dump, XPS 1/8,

ioc-mec-ppl-xps1

Newportzyla_zYesYes
TC_hexapodIOC:MEC:HEX1B9 (I think) Hexapod

pending ECS-4500 - Getting issue details... STATUS

YesMoved, and re-initialized.
Target_XMEC:USR:MMS:17

D2/D5

MF? moxa-mec-09:4001 (R62 E15), ioc-mec-usrppl-ims

PLS-85 Sample Starget_xYes

Yes. Homed to HLS and LLS, moved to 0.

FXRTS_XMEC:TC1:MMS:09

D2/D5

MF? digi-mec-07:2111 (R64A E19), ioc-mec-tc1-xuv-ims

XUV Xfxrts_xYesYes. Homed to HLS and LLS, moved to 0.
FXRTS_YMEC:TC1:MMS:08

D2/D5

MF? digi-mec-07:2110 (R64A E19), ioc-mec-tc1-xuv-ims

XUV Yfxrts_yYesYes. Homed to HLS and LLS, moved to 10.
FXRTS_ZMEC:TC1:MMS:07

D2/D5

MF? digi-mec-07:2109 (R64A E19), ioc-mec-tc1-xuv-ims

XUV Zfxrts_zYesYes. Homed to HLS and LLS, moved to 10.
BXRTS_XMEC:PPL:MMN:16VacCable 7, B7/H3, AirCable "XPS2 #3", Patch Panel #16, XPS 2/8,

ioc-mec-ppl-xps2

Newport bxrts_xYes
BXRTS_YMEC:PPL:MMN:11VacCable (no label), B7/H2, AirCable (no label), Patch Panel #11, XPS 2/3,

ioc-mec-ppl-xps2

Newport bxrts_y

Yes

  • UTS Stage
  • DB15
Yes.
BXRTS_ZMEC:PPL:MMN:09VacCable (no label), B7/H5, Air Cable "XPS2 #2", Patch Panel #9, XPS 2/1,

ioc-mec-ppl-xps2

Newport bxrts_zYes

autoConfig identifies stage, but IOC doesn't see it.

Consider changing XPS channel.

Diode_ZMEC:PPL:MMN:32

VacCable 5, T6/7, AirCable "XPS3 #7", XPS 4/5,  ioc-mec-ppl-xps4

Newport diode_zYesYes
Diode_YMEC:PPL:MMN:30

VacCable 11, (not connected) T6/10, AirCable "XPS1 #4", XPS 4/8,  ioc-mec-ppl-xps4

Newport 

diode_y

Disconnect on vacuum side of flange
Beam_blockMEC:TC1:MMS:22

T5/5

MF? moxa-mec-09:4005 (R62 E15),  ioc-mec-tc1-vt50-ims

VT-50-100block_zYesYes, soft limits 0-85

Detectors Checklist

DetectorDAQ aliasConnectionCabled?In DAQ?
epix10k-540kquad_0

Fiber:

  • B2/#1,#2 
  • PR60 E15 Middle #1 
  • R62 E33 Right #2
  • MTP to daq-mec-pgp02
    • rear
    • upper right side
    • left most fiber port

Power: B3/Quad 0

Yes
epix10k-540kquad_3

Fiber:

  • B2/#7,#8
  • PR60 E15 Middle #4 
  • R62 E33 Right #2
  • MTP to daq-mec-pgp02
    • rear
    • upper right side
    • left most fiber port

Power: B3/Quad 3

Yes
ePix100epix100a_2_bxrts

Planned: Fiber pair from Flange D2d, power from the South epix-PDU feedthru on B3.

  • MTP to daq-mec-cam01
Yes
ePix100epix100a_1_fxrts

Planned: Fiber pair from Flange B2 Quad 2 (#5/#6), power from North epix-PDU feedthru on B3.

  • MTP to daq-mec-cam01
Yes
ePix100epix100a_3_xpcs

in-air

  • Dimitri created a dummy flange (add details)
  • MTP to daq-mec-cam01
Yes
Andor Zylazyla

in-air

USB/Fiber extender to daq-mec-cam02

YesYes
VISAR 1visar_1Network connection with Windows PC ioc-mec-visar1Yes

Yes

Not tested right now since under regular use

VISAR_2visar_2Network connection with WIndows PC ioc-mec-visar2Yes

Yes

Not tested right now since under regular use

Timing diode

PVs are:

  • MEC:QADC:01:CH{0,1,2,3}
  • Flange/feedthru TBD
  • TBD interface into ioc-mec-qadc.

qadc134 IOC is running; example pyDM screen is  /reg/g/pcds/epics/ioc/common/qadc/R2.1.0/qadcScreens/qadc134Top1.ui.
XRT spectrometerhxsssN/AN/A
XTCAVztcavN/AN/A
  • No labels