ROOT 5.14.00d

GLAST Component 

Windows

Linux

Comments

ROOT Classes

calibRootData (v1r7p7)

Compiled just fine on Linux and Windows

commonRootData (v2r13)

Compiled just fine on Linux and windows.  Loaded and used the shared library in CINT.

digiRootData (v9r16)

Compiled and ran test routine on Linux and Windows.  Loaded and used the shared library in CINT.

mcRootData (v2r20)

Compiled and ran test routine on Linux and Windows.   Loaded and used the shared library in CINT.

reconRootData (v9r11)

Compiled and ran test routine on Linux and Windows.  Loaded and used the shared library in CINT.

gcrSelectRootData (v2r1)

Compiled and ran test routine on Linux and Windows.

General I/O

Can read in ntuples from DC2

Tested interactively.  Worked without problems on Linux

Can read in ntuples from DC1

Tested interactively.  Worked without problems on Linux.

Can read in full ROOT tree files generated with 5.10.00 using 5.14.00?

Tested interactively.  Worked on Linux (did receive too few bytes warning for AcdRecon)

How is hadd?

ROOT I/O Packages

RootConvert (v1r23p1)

Compiled and ran test routine on Linux

RootIo (v17r28)

Compiled and ran test routine for writing on Linux and Windows which performs writing.  Running test with reading produced some warning about reading too few bytes for vector<Double32_t> members in AcdRecon which are empty - part of the read job reads in rootTestData files created using v5.10.00.   Fixed**

ntupleWriterSvc (v3r15)

Compiled and ran test routine on Linux and Windows just fine.

CHECKOUT Packages

GlastRelease (v9r20)

When compiling Gleam on Linux - ran into a small error with GlastClassify's RootTuple.cxx - needed to include iostream for cerr.   Ran vanilla test_Gleam.exe on both Linux and Window to create a merit ntuple first - that worked fine.  The resulting ntuple was readable in CINT.
Re-ran with full ROOT output and read the resulting files using CINT on both Linux and Windows, worked - did receive warning about "too few bytes" for AcdRecon for both debug and release versions, which is now fixed **

Analysis

PyRoot - does it work?

Big hairy deal to get it to work on Windows - it required modifying the ROOT.py file in ROOTSYS/bin.  See:  http://root.cern.ch/phpBB2/viewtopic.php?p=17618&sid=294348839e56fdaa7580b6e65253dc61

RootAnalysis ()

Are there any problems with the standard analysis and plotting tools ?

Ran tutorials/demo.c in CINT on Windows - ran fine.  Also compiled and ran $ROOTSYS/test, using Makefile.win32 and nmake.  test/stress.exe failed the 8th test (trees split and compression modes) due to an assertion failure - sent message to ROOT forum.  The failure was due to compiling in debug mode and all is fine, see RootTalk Forum:  http://root.cern.ch/phpBB2/viewtopic.php?p=17519#17519.&nbsp; Ran guitest.exe and that seemed just fine.