Presentation
A presentation from Matt:
Patterns
It's a common question to ask what are the rates that the accelerator can generate. The table below lists the rates that are natural for the accelerator. These are the periodic rates that repeat exactly at the ~0.98 second period of the timing/MPS system. Of course, we can generate other rates as well that aren't exactly periodic by doing the sort of thing you described - dropping shots or irregular sequences. This has been useful for the OPCPA laser development in deciding the exact frequencies they will support.
If a base accelerator rate is chosen (e.g. 33kHz) then other rates having the same prime factors as the accelerator rate are allowed, according to this table:
(python3_env) [weaver@lcls-dev3 lcls2-timing-patterns]$ python lcls/fixed_rate_table.py
rate, Hz | factor | factors
928571 1 1
464285 2 (2,)
232142 4 (2, 2)
185714 5 (5,)
132653 7 (7,)
116071 8 (2, 2, 2)
92857 10 (2, 5)
71428 13 (13,)
66326 14 (2, 7)
58035 16 (2, 2, 2, 2)
46428 20 (2, 2, 5)
37142 25 (5, 5)
35714 26 (2, 13)
33163 28 (2, 2, 7)
26530 35 (5, 7)
23214 40 (2, 2, 2, 5)
18571 50 (2, 5, 5)
17857 52 (2, 2, 13)
16581 56 (2, 2, 2, 7)
14285 65 (5, 13)
13265 70 (2, 5, 7)
11607 80 (2, 2, 2, 2, 5)
10204 91 (7, 13)
9285 100 (2, 2, 5, 5)
8928 104 (2, 2, 2, 13)
8290 112 (2, 2, 2, 2, 7)
7428 125 (5, 5, 5)
7142 130 (2, 5, 13)
6632 140 (2, 2, 5, 7)
5306 175 (5, 5, 7)
5102 182 (2, 7, 13)
4642 200 (2, 2, 2, 5, 5)
4464 208 (2, 2, 2, 2, 13)
3714 250 (2, 5, 5, 5)
3571 260 (2, 2, 5, 13)
3316 280 (2, 2, 2, 5, 7)
2857 325 (5, 5, 13)
2653 350 (2, 5, 5, 7)
2551 364 (2, 2, 7, 13)
2321 400 (2, 2, 2, 2, 5, 5)
2040 455 (5, 7, 13)
1857 500 (2, 2, 5, 5, 5)
1785 520 (2, 2, 2, 5, 13)
1658 560 (2, 2, 2, 2, 5, 7)
1485 625 (5, 5, 5, 5)
1428 650 (2, 5, 5, 13)
1326 700 (2, 2, 5, 5, 7)
1275 728 (2, 2, 2, 7, 13)
1061 875 (5, 5, 5, 7)
1020 910 (2, 5, 7, 13)
928 1000 (2, 2, 2, 5, 5, 5)
892 1040 (2, 2, 2, 2, 5, 13)
742 1250 (2, 5, 5, 5, 5)
714 1300 (2, 2, 5, 5, 13)
663 1400 (2, 2, 2, 5, 5, 7)
637 1456 (2, 2, 2, 2, 7, 13)
571 1625 (5, 5, 5, 13)
530 1750 (2, 5, 5, 5, 7)
510 1820 (2, 2, 5, 7, 13)
464 2000 (2, 2, 2, 2, 5, 5, 5)
408 2275 (5, 5, 7, 13)
371 2500 (2, 2, 5, 5, 5, 5)
357 2600 (2, 2, 2, 5, 5, 13)
331 2800 (2, 2, 2, 2, 5, 5, 7)
285 3250 (2, 5, 5, 5, 13)
265 3500 (2, 2, 5, 5, 5, 7)
255 3640 (2, 2, 2, 5, 7, 13)
212 4375 (5, 5, 5, 5, 7)
204 4550 (2, 5, 5, 7, 13)
185 5000 (2, 2, 2, 5, 5, 5, 5)
178 5200 (2, 2, 2, 2, 5, 5, 13)
142 6500 (2, 2, 5, 5, 5, 13)
132 7000 (2, 2, 2, 5, 5, 5, 7)
127 7280 (2, 2, 2, 2, 5, 7, 13)
114 8125 (5, 5, 5, 5, 13)
106 8750 (2, 5, 5, 5, 5, 7)
102 9100 (2, 2, 5, 5, 7, 13)
92 10000 (2, 2, 2, 2, 5, 5, 5, 5)
81 11375 (5, 5, 5, 7, 13)
71 13000 (2, 2, 2, 5, 5, 5, 13)
66 14000 (2, 2, 2, 2, 5, 5, 5, 7)
57 16250 (2, 5, 5, 5, 5, 13)
53 17500 (2, 2, 5, 5, 5, 5, 7)
51 18200 (2, 2, 2, 5, 5, 7, 13)
40 22750 (2, 5, 5, 5, 7, 13)
35 26000 (2, 2, 2, 2, 5, 5, 5, 13)
28 32500 (2, 2, 5, 5, 5, 5, 13)
26 35000 (2, 2, 2, 5, 5, 5, 5, 7)
25 36400 (2, 2, 2, 2, 5, 5, 7, 13)
20 45500 (2, 2, 5, 5, 5, 7, 13)
16 56875 (5, 5, 5, 5, 7, 13)
14 65000 (2, 2, 2, 5, 5, 5, 5, 13)
13 70000 (2, 2, 2, 2, 5, 5, 5, 5, 7)
10 91000 (2, 2, 2, 5, 5, 5, 7, 13)
8 113750 (2, 5, 5, 5, 5, 7, 13)
7 130000 (2, 2, 2, 2, 5, 5, 5, 5, 13)
5 182000 (2, 2, 2, 2, 5, 5, 5, 7, 13)
4 227500 (2, 2, 5, 5, 5, 5, 7, 13)
2 455000 (2, 2, 2, 5, 5, 5, 5, 7, 13)
1 910000 (2, 2, 2, 2, 5, 5, 5, 5, 7, 13)
Event Codes
- 288 bits of "event codes":
- some have well-defined meanings (in progress)
- 16 highest bits are hutch specific for sequences
- DAQ readout groups are "extra bits" included at end of timing frame
- timing frames have destinations: e.g. bykiks, and bykikh both go to "bsy" dump
- we will not be using event-codes for bykiks: use destinations instead
Rates
- timing arrives 100us prior to beam
- accelerator max rate is 13/14MHz=929kHz
- The 71428Hz rate is special: common between LCLS1 and LCLS2
- 928kHz is max rate, but accelerator pattern repeats every 910k buckets
Trigger Types
- timing trigger types:
- sequences
- ac-line rate (1,5,10,30Hz...)
- fixed-rate patterns (1, 10, 100, 1000, 10000, 71kHz, 929kHz)
- need to coordinate hutch sequence-pattern scripts with accelerator sequence-pattern