Search/Navigation:
Related:
SLAC/EPP
/HPS Public
Jefferson Lab/Hall B
/HPS Run Wiki
S30XL-LESA/LDMX
Open new terminal
$ cd /u1/coda_rth
$ ./start_rc
Open new terminal
$ cd /u1/coda_rth
$ sudo ./start_eb [do we really need sudo here to access et file?]
Open new terminal
If running Sergey's binaries need make sure that /usr/local is a symbolic link pointing to /usr/local_new. This maybe need to be updated every day (wiped by Taylor)
$ ./start_eb
Open new terminal
$ cd /u1/coda_rth
$ ./start_eb
Connect to DTM/DPM and start ROCs in separate tabs/terminals
$ cd /u1/daq
$ source setup_env.csh
$ ./rceScripts/connect_host <slot> <rce> <id> (FIX NAMES OF ID's)
Start control server on DPM7 if not already running
$ ./rceScripts/connect_host 1 3 2
$ cd /mnt/host/day
$ ./rceScripts/start_server
Start rce GUI
$ cd /u1/daq
$ source setup_env.csh
$ ./rceScripts/start_gui.sh
Click 'connect' on RC GUI. Click 'configure' then select 'pelle0' as run type. Click 'Config' and select '/u1/coda/rcetest0.cfg'. Click 'OK'.
Click 'Download'. 'Prestart' button appears if things worked.
Click 'Prestart'.
Click 'Go'.
Host | slot | rce | id |
---|---|---|---|
dtm | 4 | 1 | 0 |
dpm0 | 1 | 0 | 0 |
1 | 0 | 2 | |
1 | 1 | 0 | |
1 | 1 | 2 | |
1 | 2 | 0 | |
1 | 2 | 2 | |
1 | 3 | 0 | |
dpm7 | 1 | 3 | 2 |
`$ATCA_IP $ATCA_SHELF/1/4/0 --ifname $ATCA_IFNAME` $port \
`$ATCA_IP $ATCA_SHELF/1/0/0 --ifname $ATCA_IFNAME` \
`$ATCA_IP $ATCA_SHELF/1/0/2 --ifname $ATCA_IFNAME` \
`$ATCA_IP $ATCA_SHELF/1/1/0 --ifname $ATCA_IFNAME` \
`$ATCA_IP $ATCA_SHELF/1/1/2 --ifname $ATCA_IFNAME` \
`$ATCA_IP $ATCA_SHELF/1/2/0 --ifname $ATCA_IFNAME` \
`$ATCA_IP $ATCA_SHELF/1/2/2 --ifname $ATCA_IFNAME` \
`$ATCA_IP $ATCA_SHELF/1/3/0 --ifname $ATCA_IFNAME` \
`$ATCA_IP $ATCA_SHELF/1/3/2 --ifname $ATCA_IFNAME`
Send software generated triggers:
$ cd /u1/daq & soruce setup_env.csh
$ ./rceScripts/connect_ti.csh (pw ask Pelle/Ryan/Ben)
$ cd /home/daq/linuxvme/tid/src
$ ./tidInt_test
Change trigger rate by modifying tidInt_test.c: tidSoftTrig(0xffff,0xFFFF,1);