You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 32 Next »

Introduction

We wanted to verify whether the sharing created by running on a virtual machine made any statistical difference to the PingER results. Thus we compare the results from PinGER running on a bare metal machine (pinger.slac.stanford.edu) vs running on a VM.

Installation of PingER Measurement Agent (MA pinger2.pl)

Spin up the virtual machine.

  • Its nickname is pingervm
  • It is called dhcp-nebula-124.26.slac.stanford.edu (134.79.124.66)
  • Install Apache
    • yum install -y httpd

Install pinger2.pl

  • You need a writeable /usr/local (SLAC uses AFS 
    • Get root access (sudo -s)
    • Set usrlocal=local in /etc/taylor.opts
    • sudo taylor everything to make the change take effect (example)
    • Install lynx (example), XML::Simple (example)
      • It also needs ping (usually pre-installed in /bin/ping), ping6 (usually pre-installed in /bin/ping6), dig (usually pre-installed in /usr/bin/dig), and mail (usually pre-installed in /bin/mail)
  • Follow the instructions at:  Installation Overview
    • tar xzf pinger-2.0.3.tar.gz
    • cd pinger-2.0.3
    • ./configure (example)
    • make test_prereqs
    • make (example)
  • Then 
    • make install (example)
    • make install_cron (example). Following this one has to move the line added at the end to above where Taylor makes changes to the file (example).

Verify installation

  • To see if the cronjob is running look at the dates on the files /usr/local/share/pinger/pingerCronStat.stdout and /usr/local/share/pinger/pingerCronStat.stderr, they should be within the last 30 mins (example)
  •  Examine the above files (in particular the stderr file) to verify pinger2.pl is properly configured (an example of a typical error in the stderr file). If all is well then the stderr file will be empty. Example of a normal stdout file.
  • Look at the latest file in /usr/local/share/pinger/data/ and look at the most recent data (example).

Installation of traceroute.pl and ping_data.pl

These are CGI scripts to enable a reverse traceroute and ping server (traceroute.pl), and to enable the gathering of data (ping_data.pl)  from the archive sites. The two scripts were installed in the standard CGI script location /var/www/cgi-bin as defined in /etc/httpd/conf/http.conf.  They are accessible from within SLAC as: http://dhcp-nebula-124-66.slac.stanford.edu/cgi-bin/ping_data.pl and http://dhcp-nebula-124-66.slac.stanford.edu/cgi-bin/traceroute.pl. Since they are on port 80 there is no access to the web server from offiste.

To ensure the web server (Apache) restarts after a reboot I also had to issue:

[cottrell@dhcp-nebula-priv-52-7 ~]$ sudo -s

[sudo] password for cottrell: 

[root@dhcp-nebula-priv-52-7 cottrell]# /sbin/chkconfig httpd on

[root@dhcp-nebula-priv-52-7 cottrell]# /etc/init.d/httpd restart

Stopping httpd:                                            [FAILED]

Starting httpd:                                            [  OK  ]
[root@dhcp-nebula-priv-52-7 cottrell]# ps -efl | grep httpd

1 S root      3056     1  0  80   0 - 46710 poll_s 07:42 ?        00:00:00 /usr/sbin/httpd

5 S apache    3058  3056  0  80   0 - 46710 inet_c 07:42 ?        00:00:00 /usr/sbin/httpd

5 S apache    3059  3056  0  80   0 - 46710 inet_c 07:42 ?        00:00:00 /usr/sbin/httpd

5 S apache    3060  3056  0  80   0 - 46710 inet_c 07:42 ?        00:00:00 /usr/sbin/httpd

5 S apache    3061  3056  0  80   0 - 46710 inet_c 07:42 ?        00:00:00 /usr/sbin/httpd

5 S apache    3062  3056  0  80   0 - 46710 inet_c 07:42 ?        00:00:00 /usr/sbin/httpd

5 S apache    3063  3056  0  80   0 - 46710 inet_c 07:42 ?        00:00:00 /usr/sbin/httpd

5 S apache    3064  3056  0  80   0 - 46710 inet_c 07:42 ?        00:00:00 /usr/sbin/httpd

5 S apache    3065  3056  0  80   0 - 46710 inet_c 07:42 ?        00:00:00 /usr/sbin/httpd

0 S root      3083  3029  0  80   0 - 26328 pipe_w 07:46 pts/0    00:00:00 grep httpd

Analysis of Floating address Results

See here

Fixed IP address

Yee reconfigured the VM to use a fixed address. The IP address is now 172.23.52.7. I changed the SLAC  beacons list this host points to so it only monitors pinger.slac.stanford.edu.

I changed the /usr/local/share/pinger/pinger.xml file to only ping the single beacon pinger.slac.stanford.edu and to point to the above beacon list at http://www-iepm.slac.stanford.edu/pinger/beacons-pingervm.txt

I changed the file /afs/slac.stanford.edu/package/pinger/pinger2/share/pinger/pinger.xml from pointing to here to pointing to here in the <HostList>

Traceroutes from pingervm to pinger

 

 

 

 

  • No labels