General note:
If a controls device is not working, report to FACET staff. FACET staff will create a CATER and follow up with relevant support
Process for FACET-II Controls CATER work:
--------------------------------------------------------
During the run the FACET-II Controls PM would assign CATERs to the EED support person or Cosylab support person with the appropriate expertise. If a contractor with expertise is not available, then the CATER would be assign to the EED support person as the default, and an note added to the CATER description window with a date and initials.
The FACET-II Controls PM will host weekly meetings (30 minutes) with FACET-II Management (Laruen, Christine, Spencer) to review the FACET-II active CATER list (SWE,SWEXT,CTL) and to: set priorities, review status, and discuss issues and new projects. For high/medium priority CATERS, without an available person to resolve the CATER, the FACET-II Controls PM, will escalate the CATER to EED Management in a bi-weekly EED PM meeting or before that schedule meeting, which can be done from the CATER for tracking purposes. If the CATER the issues is not resolved in a timely manner for FACET-II Management, the next step for FACET-II Management is to escalate the CATER(s) to EED Management directly.
Note: Most of the EED developers are busy supporting LCLS-II currently, so we’ll try to use contactors to support their work where possible
FACET-II Controls Subsystems Support (EPICS)
-----------------------------------------------------------
BCS – sw: Garth Brown , hw: Evan Rodriguez
BPMs – sw: Sonya Hoobler, hw: Mike Harms, Dan Sciortino
BLEN – sw: Taine Eriksen (new), hw: James Murphy
Event – sw: Carolina Bianchini, hw: Mike Harms
Feedback – sw/hw: Jeremy Mock
Faraday Cup – sw: Garth Brown
MPS - sw/hw: Jeremy Mock
Networking- Charlie Granieri
Profile Monitors/OTRS/Cameras – sw/hw: Jeremy Mock
Laser -- sw/hw: Shawn Alverson
S10 Laser Locking, was not completed. - TID: Charlie Xu and Matlab: C. Gumerlock/Justin May -
S20 Laser, Gath Brown initially did work
Magnets – sw: Kristi Luchini, hw: Briant Lam
RF --
High Power RF – sw: Kristi Luchini, hw: Paul Stiles
Low Level RF
ATCA - (in transition from TID to EED)
EED: sw: An Le/Kristi Luchini hw: John Sikora, Dave Steele
TID: sw: Jesus Vasquez/Kukhee Kim
PAD/PACS -- sw: Shantha Condamoor, hw: Greg Dalit
Motion Control - sw: Namrata Balakrishnan, hw: James Bong
Motors (Pico,XPS,etc)
Wire Scanners, LVDTs
Collimators
PPS – sw: Garth Brown, hw: Eddy Chin
Temperature – sw/hw: Namrata Balakrishnan,
Toroids – sw: Taine Ericksen, hw: James Murphy
Vacuum – sw/hw: Shawn Alverson, hw: Sony Nguyen
Computer Systems/CCI : Ken Brobeck
SCORE:
Oracle: Poonam Pandy
Java Interface: ?
AIDA: ? This use to be Greg White but he’s not available.
Linux & VMS – we have a contactor finishing up work on VMS for Aida. After this work is done additional controls work must be done on the Linux end to get Aida working again.
Matlab Applications: This is Bryce Jacobson group.
Model: SCP – Mark Woodley
Matlab model -- ?
SLC Controls:
There are only a few of us that remain in EED that still have knowledge of the SLC controls system on VMS and the micros. This includes, Sonya Hoobler, Mike Zelazny, Ken Brobeck, Mike Harms, Sony Nguyen and myself. In addition, Nancy Spencer is available on a limited basis to assist.
It’s important to note that NO software development is being done on VMS or the micro. The exception to this is the Aida work currently underway for FACET-II. This work is being done by a contractor with Greg White’s oversight.
In the SLC control system we have also not done a dbGen on SLC in years, and a plan to do so is a big undertaking, and could be a bit tricky with only few of use left, to make this happen and to back out if a problem occurs. For the BC20E Upgrade we did plan for a dbgen/dbinstall, but this project was postponed.
CosyLab Contactor Expertise:
----------------------------------------------
Janos Vamosi -- Motion Control, Vacuum, Temperature, Facilities (Water,HVAC,etc)
Ziga Oven – Profile Monitors/Cameras
Janez Govednik – Electrical Engineer: Drawings, BPMs, BLEN, Laser, Motion Control, Temperature, Vacuum