The T9 beam line is controlled from the EBCR barrack.
Magnet settings
2 sets of table are provided in the EBCR barrack - none of them is optimized for our setup, so ONLY USE THIS TABLE to control the beam.
Slits settings
the slits are controlled with the verical and horizontal control; to get a FWHM of x mm you must input a value of 50+x/2; for example, to get an aperture of +- 5mm you should input a value of 52.5. The following values should be used:
MNP17 settings
use the control display in the EBCR and load the MNP17 settings. Use the following table to control magnetic field. Special values are identified with a *.