Confluence will be unusable 23-July-2024 at 06:00 due to a Crowd upgrade.
# Log into server $ ssh rdsrv107 # Run in bash mode $ bash # Go to software directory $ cd /u1/DUNE/workspace/timing-board-software/ # Run the start run script $ source start_run.sh
Acceptable Warning message
19-03-18 11:29:57.208636 [7f5a80f5d700] WARNING - Class "I2CMasterNode" is unknown to the NodeTreeBuilder class factory. A plain node will be returned instead.
19-03-18 11:29:57.208683 [7f5a80f5d700] WARNING - No class types have been defined
19-03-18 11:29:57.208794 [7f5a80f5d700] WARNING - Class "I2CMasterNode" is unknown to the NodeTreeBuilder class factory. A plain node will be returned instead.
19-03-18 11:29:57.208814 [7f5a80f5d700] WARNING - No class types have been defined
19-03-18 11:29:57.208914 [7f5a80f5d700] WARNING - Class "SI5344Node" is unknown to the NodeTreeBuilder class factory. A plain node will be returned instead.
19-03-18 11:29:57.208932 [7f5a80f5d700] WARNING - No class types have been defined
19-03-18 11:29:57.210639 [7f5a80f5d700] WARNING - Class "PartitionNode" is unknown to the NodeTreeBuilder class factory. A plain node will be returned instead.
19-03-18 11:29:57.210664 [7f5a80f5d700] WARNING - No class types have been defined
# Log into server $ ssh rdsrv107 # Run in bash mode $ bash # Setup the environment $ source /u1/DUNE/setup_env.sh # Go to software directory $ cd /u1/DUNE/workspace/software_v3/ # Initialize the timing generator $ ./board_setup.py DUNE_FMC_MASTER # Configure the timing generator for 1 Hz triggers $ ./config.py DUNE_FMC_MASTER
# Log into server (inside lxplus.cern.ch) $ ssh np04daq@np04-srv-012 # Setup the environment $ source /nfs/sw/timing/pro/software/timing-board-software/tests/env.sh # clear trigger configuration $ pdtbutler master DUNE_FMC_MASTER trigclear # Configure the timing generator for ~0.7 Hz triggers # Rate = 50 Mhz/2^(12+divider) # e.g. Rate = 0.7 Hz when divider =14 $ pdtbutler master DUNE_FMC_MASTER triggen 14