Introduction

May was filled to the brim with beamtime, and HE is starting to heat up.

PMPS V2.0.0 on the K-line

PMPS V2.0.0 is now installed on all the K line PLCs , TMO and RIX hutches.
Same as V1.0.0 on the L line, the eV ranges has been expanded to 32 bits instead of 16.
The way transmission can be captured has now been changed. It's no longer a percentage. A decimal points are now accepted, with value of 1 indicating full transmission.
In the Preemptive requests tab, the device names are now displayed along with the hex code request ID.
And finally, no more milliseconds duration to enter for the bypass duration. Fast fault duration is determined by an "expiration" end date and time.
1. You can either select or enter the desired expiration in the calendar widget.
2. Press enter. Now you can see the date in the bypass end readback.
3. Click on activate. Now you will see the current date and time in the bypass start readback.

The LCLS-II DAQ is now controllable via hutch python. This has been deployed in RIX.
The RIX hutch python has been outfitted with a mono grating/vernier scanning plan.

We've added a helpful page for debugging FEE Camera issues. Check it out: FEE Imager Camera Debug