2.5.1

These are instructions for building Python 2.5.1 for the various OSes supported.

tiger-i386-32bit

These instructions should be performed as the glastrm user on the machine bldmac01 (accessible only from within SLAC).

1. Download Python 2.5.1 from http://www.python.org/ftp/python/2.5.1/Python-2.5.1.tgz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python if it doesn't already exist.
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python
3. Ungzip and Untar the file Python-2.5.1.tgz
4. Change directory to Python-2.5.1
5. Set the environment variable EXTRA_CFLAGS to "-fno-common"
6. Execute ./configure --prefix /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/2.5.1-gl3/gcc40 --enable-unicode=ucs2
7. Edit the file Modules/posixmodule.c and change lines 342 and 360 to "#ifdef _APPLE_" (without quotes) and save/exit.
8. Execute make
9. Execute make install
10. Leave and erase the current directory (Python-2.5.1)

Additional Python Modules

These modules should additionally be installed into python.

NumPy - 1.2.0

1. Download numpy-1.2.0.tar.gz from http://sourceforge.net/project/showfiles.php?group_id=1369&package_id=175103&release_id=628858 and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/ if it doesn't already exist.
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python
3. Extract numpy-1.2.0.tar.gz
4. Change directory to numpy-1.2.0
5. Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/2.5.1-gl3/gcc40/bin/python setup.py install
6. Leave and erase the current directory (numpy-1.2.0)

PyFITS - 1.3

1. Download pyfits-1.3.tar.gz from http://www.stsci.edu/resources/software_hardware/pyfits/pyfits-1.3.tar.gz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/ if it doesn't already exist.
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python
3. Extract pyfits-1.3.tar.gz
4. Change directory to pyfits-1.3
5. Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/2.5.1-gl3/gcc40/bin/python setup.py install
6. Leave and erase pyfits-1.3

4Suite XML - 1.0.2

1. Download 4Suite-XML-1.0.2.tar.gz from http://downloads.sourceforge.net/sourceforge/foursuite/4Suite-XML-1.0.2.tar.gz?use_mirror=voxel and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/ if it doesn't already exist.
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python
3. Extract 4Suite-XML-1.0.2.tar.gz
4. Change directory to 4Suite-XML-1.0.2
5. Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/2.5.1-gl3/gcc40/bin/python setup.py install --prefix /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/2.5.1-gl3/gcc40
6. Leave and erase 4Suite-XML-1.0.2

2.5.1-gl4

These are the instructions to build python 2.5.1-gl4 on the various supported platforms

tiger-i386-32bit-gcc40

These instructions should be performed as the glastrm user on the machine bldmac01 (accessible only from within SLAC).

1. Download Python 2.5.1 from http://www.python.org/ftp/python/2.5.1/Python-2.5.1.tgz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python if it doesn't already exist.
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python
3. Ungzip and Untar the file Python-2.5.1.tgz
4. Change directory to Python-2.5.1
5. Set the environment variable EXTRA_CFLAGS to "-fno-common"
6. Execute ./configure --prefix /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40 --enable-unicode=ucs2
7. Edit the file Modules/posixmodule.c and change lines 342 and 360 to "#ifdef _APPLE_" (without quotes) and save/exit.
8. Execute make
9. Execute make install
10. Leave and erase the current directory (Python-2.5.1)

Additional Python Modules

These modules should additionally be installed into python.

NumPy - 1.2.0

1. Download numpy-1.2.0.tar.gz from http://sourceforge.net/project/showfiles.php?group_id=1369&package_id=175103&release_id=628858 and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/ if it doesn't already exist.
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python
3. Extract numpy-1.2.0.tar.gz
4. Change directory to numpy-1.2.0
5. Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40/bin/python setup.py install
6. Leave and erase the current directory (numpy-1.2.0)

PyFITS - 2.1.1

1. Download pyfits-2.1.1.tar.gz from http://www.stsci.edu/resources/software_hardware/pyfits/pyfits-2.1.1.tar.gz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/ if it doesn't already exist.
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python
3. Extract pyfits-2.1.1.tar.gz
4. Change directory to pyfits-2.1.1
5. Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40/bin/python setup.py install
6. Leave and erase pyfits-2.1.1

4Suite XML - 1.0.2

1. Download 4Suite-XML-1.0.2.tar.gz from http://downloads.sourceforge.net/sourceforge/foursuite/4Suite-XML-1.0.2.tar.gz?use_mirror=voxel and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/ if it doesn't already exist.
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python
3. Extract 4Suite-XML-1.0.2.tar.gz
4. Change directory to 4Suite-XML-1.0.2
5. Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40/bin/python setup.py install --prefix /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40
6. Leave and erase 4Suite-XML-1.0.2

iPython - 0.10

1. Download ipython-0.10.tar.gz from http://ipython.scipy.org/dist/ipython-0.10.tar.gz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/ if it doesn't already exist.
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python
3. Extract ipython-0.10.tar.gz
4. Change directory to ipython-0.10
5. Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40/bin/python setup.py install
6. Leave and erase ipython-0.10

redhat5-i686-64bit-gcc41

These instructions should be performed as the glastrm user 

1. Download Python 2.5.1 from http://www.python.org/ftp/python/2.5.1/Python-2.5.1.tgz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc41/python if it doesn't already exist.
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686-64bit-gcc41/python
3. Ungzip and Untar the file Python-2.5.1.tgz
4. Change directory to Python-2.5.1
5. Set the environment variable EXTRA_CFLAGS to "-fPIC"
6. Execute ./configure --prefix /afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686-64bit-gcc41/python/2.5.1-gl4/gcc41
7. Execute make
8. Execute make install
9. Leave and erase the current directory (Python-2.5.1)
   

2.5.1-gl5 

redhat4-i686-32bit-gcc34

These are instructions for building Python 2.5.1 for the various OSes supported.

These instructions should be performed as the glastrm user 

1. Download Python 2.5.1 from http://www.python.org/ftp/python/2.5.1/Python-2.5.1.tgz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc41/python if it doesn't already exist.
2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
3. Ungzip and Untar the file Python-2.5.1.tgz
4. Change directory to Python-2.5.1
5. Set the environment variable EXTRA_CFLAGS to "-fPIC"
6. Execute ./configure --prefix /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34
7. Execute make
8. Execute make install
9. Leave and erase the current directory (Python-2.5.1)

Additional Python Modules

These modules should additionally be installed into python.

NumPy - 1.4.0

1. Download numpy-1.4.0.tar.gz from http://sourceforge.net/project/showfiles.php?group_id=1369&package_id=175103&release_id=628858 and save to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python if it doesn't already exist.
2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
3. Extract numpy-1.4.0.tar.gz
4. Change directory to numpy-1.4.0
5. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34/bin/python setup.py install
6. Leave and erase the current directory (numpy-1.4.0)
   

PyFITS - 2.1.1

1. Download pyfits-2.1.1.tar.gz from http://www.stsci.edu/resources/software_hardware/pyfits/pyfits-2.1.1.tar.gz and save to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python if it doesn't already exist.
2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
3. Extract pyfits-2.1.1.tar.gz
4. Change directory to pyfits-2.1.1
5. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34/bin/python setup.py install
6. Leave and erase pyfits-2.1.1
   

matplotlib 0.99

1. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
2. Extract matplotlib-0.99.1.tar.gz
3. Change directory to matplotlib-0.99.1/ 
4. setenv DISPLAY localhost:0.0
5. xhost +
6. Change setup.cfg set tkagg = False , wxagg = False, macosx = False
7. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34/bin/python setup.py build
8. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34/bin/python setup.py install
9. Leave and erase matplotlib-0.99.1/