v3060A-gl1

These are instructions for building APE 2.3-gl1 for the various OSes supported.

leopard-i386-32bit

These instructions should be performed as the glastrm user on a machine running leopard (bldmac02 as of this writing).

1. Obtain a APE 2.3 source code from James Peachey and save to /afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape if it doesn't already exist.
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape
3. Unzip and Untar the file ape-v2r3-src.tar.gz
4. Change directory to ape
5. Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape/2.3-gl1/gcc40
6. Execute make
7. Execute make install
8. Leave and erase the ape directory