- In a terminal type: camViewer
- There are many options:
- -c cameraname will start camViewer on that camera specifically.
- -m with -c will open the master panel for that camera.
- -w is the wait time before the camera display stops (set to 24 hours or so).
- You want to go to the top Markers/ROI and choose Use Global Markers. This shows the saved markers rather than one in the current camViewer instance.
- To update a cross. Click the desired Marker value:
- Here marker #1 is active.
- Then click on the camViewer image to set a new cross.
- ALWAYS DESELECT THE CROSS AFTER SETTING.
- ALWAYS eloggrab the new cross position (numbers and image).
Overview
Content Tools