You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 22
Next »
- Cable was produced in-house, see
TIDIDECS-114
-
Getting issue details...
STATUS
- There are no serial number on the cables, so for now only using one and assigning it "Cable 01"
- Measuring between banana connector on the cable and test points on the board
| Photo | SENSOR HV | HV GND | AGND | P24V0A | DGND | P24V0D |
---|
Cable 01 - Board 38-C00-02
| | 0.6R | 0.7R | 0.4R | 0.4R | 0.3R | 0.3R |
---|
Measuring on test points on the analog board.
- FPGA is not programmed.
- All power rails are not powered up yet on the digital board, see Issue #3.
- All power rails on the analog board are disabled by default due to the pull-down resistor R21.
|
| P24V0D | P24V0A |
---|
Boards 38-C00-01 39-C00-01 | Analog board | 23.96 V | 24.01 V |
---|
Digital board | 23.96 V | 24.01 V |
---|
Power supply current | 170 mA | 0.2 mA |
---|