There are two Raw Data Formats for the data produced by the monitor, the early one (no longer created but still in the archive):
Monitor_Host_Name Monitor_Addr Remote__Name Remote_Addr Bytes Time Xmt Rcv Min Avg Max
minos.slac.stanford.edu 134.79.196.100 www.lbl.gov 128.3.7.14 100 870393602 10 10 6 18 125
minos.slac.stanford.edu 134.79.196.100 ns1.cebaf.gov 129.57.32.100 100 870393602 10 10 74 93 125
Where the columns are separated by a single space.
The Bytes can be 100 or 1000 (sometimes it will be less than 100, in which case treat as 100), it is
the number of bytes in each ping packet.
Time is the Unix Epochal time.
Xmt is the number of ping packets sent.
Rcv is the number of ping packets received.
Min is the minimum response time for the packets sent (in milliseconds).
Avg is the average response time for the packets sent.
Max is the maximum response time for the packets sent.
There should always be > 7 tokens in the line. If no response to the
pings were received then there will only be 8 tokens in the line
and Rcv (the 8th token) will be 0.
Early versions of the data collection program lost the Remote_Addr
when the remote site was not reachable. In this case the data only
contains 6 tokens. It should either be ignored or treated as
remote site unreachable.
The more recent one looks like:
# pinger.slac.stanford.edu 134.79.240.30 ping.slac.stanford.edu 134.79.18.21 100 1152489601 10 10 0.255 0.341 0.467 0 1 2 3 4 5 6 7 8 9 0.287 0.380 0.467 0.391 0.327 0.387 0.291 0.332 0.255 0.299
The first 11 fields are the same as before. Then for each ping response received the Sequence number is recorded, followed by the RTT for each ping
Note that though one normally asks for 10 pings to be sent since it uses the default ping on Linux the deadline feature of Linux pings means up to 30 pings can be sent while it awaits to hear 10 responses.
Also funny things happen pinged host returns duplicated ping responses.