Preferred development workflow with git repository:

Generic tasks/ideas

Task	Status	Assigned By	Actively Worked on by...
Full lists of PVs used in HLAs accessible from each help menu		Glen	Sharon
Complete documentation for each HLA & generic controls/modeling interface		Glen
Remove remaining dependencies on legacy Matlab2012 & "matlab model" code		Glen
Remove instances of direct use of LabCA - move everything over to using PV class in readiness for implementation of PVA	Needs doing by mid-2023?	Glen
Faster list-based caget operations in PV class + improve first-time calls (speed up LiveModel initialization)		Glen
Implement asyn operations when move to >Matlab2021		Glen
Extend matlab server model to facet-srv01?		Glen
Change default range of Schottky Scan GUI		Loney	Sharon
Automation of 10-3/10-4 phase scans (in Schottky GUI or phase scan GUI)	To be implemented into new phase scan GUI	Loney	Buschmann
Add Logbook feature to BSA GUI		Loney	Sharon

Task	Status	Assigned by	Actively Worked on by...
Larger # buffered BPM data acquisitions (up to 1000 @ 10Hz?)	11/7/22: Tested, deployed in Wirescan app- appears to be working well.	Glen	COMPLETE
Asynchronous calls (especially for bufferedacq) from Matlab	11/4/22: Tested, declared working.	Glen	COMPLETE
Implement interface to SCP corr plots	10/22/22: Implemented by George, documentation on AIDA-PVA website, needs testing	Glen	George, Glen
Multi-device set (and asynchronous status return) on PMDL (and others...?)	11/7/22: Tested, working well in MDLFF app for multi-set of PMDL values.	Glen	COMPLETE
Feedback HSTA bit control (be able to change Feedback → Compute)	9/22/22: Implemented and tested ability to write raw HSTA bit values, matlab interface to toggle OFF, Compute, Feedback states written and tested. George to implement cleaner AIDA-level state change interface.	Glen	George, Glen
Fix AIDA service crashes on VAX (or be able to detect and self correct)	9/22/22: Many potential non catching of errors found by George and changes to server-side code made, cannot induce server failures by testing. Need to operationally observe to see if fixes are good.	Glen	George & Greg

Task	Status	Assigned By	Actively Worked on by...
Plotted orbit doesn't respect pre-selected BPM list when loading a Config with pre-measured BPM data		Glen
Indicate TRIM operation in progress by grey-out of "Do correction" button or similar		Glen
Make MIA tab functionality work		Glen
"Plot all" option doesn't work correctly when displaying corrected orbit after performing orbit correction calc		Glen
Re-instate some auto dispersion correct functionality (e.g. DL10 correction with Q10731)		Glen
Add kick and dispersion source fit functionality to orbit and dispersion tabs		Glen
Changing fit location should update plot and fit data- currently doesn't work		Glen
Link reference orbit saved to Python bpm orbit tool reference saves		Glen
Implement TMIT cuts for BPM orbit		Glen
Implement measured Rmat (as opposed to model Rmat) interface (including measurement tools?)		Glen

Task	Status	Assigned By	Actively Worked on by...
Store design L1,L2,L3 operating phases in EPICS PVs		Glen
Watcher version of LEM: info on when LEM needed etc + interface with CUD		Glen
Ignore CQ's & SQ's for purposes of Twiss parameter propagation (BMAG plot)		Glen
Make a way to flag "Matching Quads" and deal with them differently when "LEM to model"?		Glen
Fix BACT=0 causing "NaN"'s in BMAG propogation		Glen

Task	Status	Assigned By	Actively Worked on by...
On Multi-Wire matching tabs, wire names don't change when reading in data from different Linac section		Glen
Keep last vals in MW tab when switch back from other tab		Glen
Auto de-select CQ & SQ magnets from matching options		Glen
Add native quad scan functionality		Glen
Allow Undo button to retain old values after calculating new match		Loney

Task	Assigned By	Actively Worked on by...
Jitter button ON/OFF status not working properly	Glen
DL10 controller name "IN10"→"LI10" on GUI	Glen
Settings GUI plot to include line showing feedback desired offset value	Glen
Fix freezing of GUI when closing settings panels	Glen
Tie DL10 feedback stpoint directly to LLRF control → switch off "slow fb" on RF controller when feedback on and vice-versa, increase feedback gain	Glen
Implement full PID controller coefficients to each feedback, setup and test and include P or PID as option (at least for DL10)	Glen
Implement use of LI17 fast phase shifters for BC20 feedback through SCP multiknob controls	Glen
Auto-adjust gains for changes in beam rate	Glen
Add FFS transverse feedback	Glen	Lauren

Task	Status	Assigned by	Actively Worked on by...
Data collection: have watcher record each GOLD entry and associated data and save to disk		Glen
Make user-facing configuration GUI to examine training data & evaluate performance & tune NN or linear models or manually tweak		Glen
Implement multi-device write commands in AIDA for PMDL data	10/7/22: AIDA software written to allow this 11/7/22: Implemented in MDLFF app and tested.	Glen	COMPLETE

Task	Status	Assigned by	Actively Worked on by...
User access to PMT timing & gate widths		Glen
When selecting motor position units option- propagate changes to plot to see centroid of scan in motor units		Glen
Jitter correction for Linac wirescanners in L2 and L3	9/19/22: Initial tests show buffered bpm acq with ~200 pulses works, initial code implemented, needs testing with beam 10/7/22: AIDA now supports up to 1800 buffered data points 11/7/22: Debugged jitter correction code with AIDA BPM in app, test worked well- all beam size measurements in L2 & L3 reduce when jitter correction selected.	Glen	COMPLETE

Task	Status	Assigned by	Actively Worked on by...
Write current IP waist position to a dedicated PV instead of sharing with desired waist position		Ryan

Task	Status	Assigned by	Actively Worked on by...
Create	11/6/22: Tested, working. Results are unstable, assuming this is due to dispersion leakage and large energy jitter. Next job is to implement SVD algorithm to simultaneously fit dispersion functions and remove energy jitter component.	Glen	Glen