Turn on hardware

• Set hutch to “Class 1”, or “Class 4 Glass Laser”, or “Class 4 Dual Laser”, or “Class 4 Split Mode
• At the LSS display, badge in and open Shutter S4, and press the “Press to reset interlocks"

• Turn on four TDK Lambda power supplies. Power switch to “1” .Press the tiny “out” button at each of the 4 supplies.

• Turn on four chillers

• Switch on NP Photonics Seed Laser: toggle the “pump” switch from position 0 to 1

Turn on YFE

Load the waveform recipe and shape the waveform

Open the beam monitor cameras 

Check alignment

Optimize SHG and HWP