| Detector Number | Type | Function | In DAQ? | Notes | Cabled? | Running? | Comments |
|---|---|---|---|---|---|---|---|
| 1 | ePix100a | XRTS | Yes | in-vac | Yes | ePix0 Q2 fibers/PDU | |
| 2 | ePix100a | User spectrometer | Yes | in-vac | No | Not in TC yet. Q3 fibers/PDU | |
| 3 | ePix100a | single photon diagnostics | Yes | in-vac | Yes | etch 12; vertical holder Q0 fibers/PDU | |
| 4 | ePix100a | single photon diagnostics | Yes | in-vac | Yes | etch 25; horizontal holder Q1 fibers/PDU | |
| 5 | Zyla | MXI | Yes | in-air | zyla_xray_east Restart procedure at Zyla and iStar confluence page. Host is daq-mec-cam02. | ||
| 6 | XTCAV | Yes | in-vac |
ePix100a SPC vertical → Q0 fiber & PDU S0
ePix100a SPC horizontal → Q1 fiber & PDU S1
ePix100a XRTS → Q2 fiber & PDU S2
ePix100a Kalpha → Q3 fiber & PDU S3
fiber mapping is currently the same as for 4x quads
The current DAQ configuration is that the four epix10kaQuads are hosted by daq-mec-pgp02, and are running the epix10kaquad software.
Normally, the epix100a cameras are hosted by daq-mec-cam01 and running the epix100a software.
Path forward:
- Comment out all epix10kaQuads in mec.cnf
- Change host to daq-mec-pgp02 for the epix100a.