You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 14
Next »
Preferred development workflow with git repository:
- Create new development branch for work in personal clone of repo
- Do work and test
- Merge in any recent changes from main branch
- Push your branch, email Glen to evaluate & merge into main branch
Generic tasks/ideas
| Task | Status | Assigned By | Actively Worked on by... |
|---|
| Full lists of PVs used in HLAs accessible from each help menu |
| Glen |
|
| Complete documentation for each HLA & generic controls/modeling interface |
| Glen |
|
| Remove remaining dependencies on legacy Matlab2012 & "matlab model" code |
| Glen |
|
| Remove instances of direct use of LabCA - move everything over to using PV class in readiness for implementation of PVA | Needs doing by mid-2023? | Glen |
|
| Faster list-based caget operations in PV class (speed up LiveModel initialization) |
| Glen |
|
| Implement asyn operations when move to >Matlab2021 |
| Glen |
|
| Extend matlab server model to facet-srv01 |
| Glen |
|
AIDA-PVA
| Task | Status | Assigned by | Actively Worked on by... |
|---|
| Larger # buffered BPM data acquisitions (up to 1000 @ 10Hz?) |
| Glen | George, Greg |
| Asynchronous calls (especially for bufferedacq) from Matlab | 9/22/22: Implemented and tested for non-BPM objects, code written for F2_bpms needs testing when beam restored | Glen | George, Glen |
| Implement interface to SCP corr plots |
| Glen | George |
| Multi-device set (and asynchronous status return) on PMDL (and others...?) |
| Glen | George |
| Feedback HSTA bit control (be able to change Feedback → Compute) | 9/22/22: Implemented and tested ability to write raw HSTA bit values, matlab interface to toggle OFF, Compute, Feedback states written and tested. George to implement cleaner AIDA-level state change interface. | Glen | George, Glen |
| Fix AIDA service crashes on VAX (or be able to detect and self correct) | 9/22/22: Many potential non catching of errors found by George and changes to server-side code made, cannot induce server failures by testing. Need to operational observe to see if fixes are good. | Glen | George & Greg |
F2_Orbit
| Task | Status | Assigned By | Actively Worked on by... |
|---|
| Plotted orbit doesn't respect pre-selected BPM list when loading a Config with pre-measured BPM data |
| Glen |
|
| Indicate TRIM operation in progress by grey-out of "Do correction" button or similar |
| Glen |
|
| Make MIA tab functionality work |
| Glen |
|
| "Plot all" option doesn't work correctly when displaying corrected orbit after performing orbit correction calc |
| Glen |
|
| Re-instate some auto dispersion correct functionality (e.g. DL10 correction with Q10731) |
| Glen |
|
| Add kick and dispersion source fit functionality to orbit and dispersion tabs |
| Glen |
|
| Changing fit location should update plot and fit data- currently doesn't work |
| Glen |
|
| Link reference orbit saved to Python bpm orbit tool reference saves |
| Glen |
|
| Implement TMIT cuts for BPM orbit |
| Glen |
|
| Implement measured Rmat (as opposed to model Rmat) interface (including measurement tools?) |
| Glen |
|
F2_LEM
| Task | Status | Assigned By | Actively Worked on by... |
|---|
| Store design L1,L2,L3 operating phases in EPICS PVs |
| Glen |
|
| Watcher version of LEM: info on when LEM needed etc + interface with CUD |
| Glen |
|
| Ignore CQ's & SQ's for purposes of Twiss parameter propagation (BMAG plot) |
| Glen |
|
| Make a way to flag "Matching Quads" and deal with them differently when "LEM to model"? |
| Glen |
|
| Fix BACT=0 causing "NaN"'s in BMAG propogation |
| Glen |
|
F2_Matching
| Task | Status | Assigned By | Actively Worked on by... |
|---|
| On Multi-Wire matching tabs, wire names don't change when reading in data from different Linac section |
| Glen |
|
| Keep last vals in MW tab when switch back from other tab |
| Glen |
|
| Auto de-select CQ & SQ magnets from matching options |
| Glen |
|
| Add native quad scan functionality |
| Glen |
|
F2_Feedback
| Task | Status | Assigned By | Actively Worked on by... |
|---|
| Jitter button ON/OFF status not working properly |
| Glen |
|
| DL10 controller name "IN10"→"LI10" on GUI |
| Glen |
|
| Settings GUI plot to include line showing feedback desired offset value |
| Glen |
|
| Fix freezing of GUI when closing settings panels |
| Glen |
|
| Tie DL10 feedback stpoint directly to LLRF control → switch off "slow fb" on RF controller when feedback on and vice-versa, increase feedback gain |
| Glen |
|
| Implement full PID controller coefficients to each feedback, setup and test and include P or PID as option (at least for DL10) |
| Glen |
|
| Implement use of LI17 fast phase shifters for BC20 feedback through SCP multiknob controls |
| Glen |
|
| Auto-adjust gains for changes in beam rate |
| Glen |
|
| Add FFS transverse feedback |
| Glen | Lauren |
MDL_FeedForward
| Task | Status | Assigned by | Actively Worked on by... |
|---|
| Data collection: have watcher record each GOLD entry and associated data and save to disk |
| Glen |
|
| Make user-facing configuration GUI to examine training data & evaluate performance & tune NN or linear models or manually tweak |
| Glen |
|
Wirescanner
| Task | Status | Assigned by | Actively Worked on by... |
|---|
| User access to PMT timing & gate widths |
| Glen |
|
| When selecting motor position units option- propagate changes to plot to see centroid of scan in motor units |
| Glen |
|
| Jitter correction for Linac wirescanners in L2 and L3 | 9/19/22: Initial tests show buffered bpm acq with ~200 pulses works, initial code implemented, needs testing with beam | Glen | Glen |
S20 Configurator
| Task | Status | Assigned by | Actively Worked on by... |
|---|
| Write current IP waist position to a dedicated PV instead of sharing with desired waist position |
| Ryan |
|