7.11 Opal Camera Configuration

This page documents the configuration and cabling used by the Opal cameras in Run20 X523.

DAQ Configuration (mec.cnf)

Camera Name	Type	Camedt Label	Host	Hardware	Flags/EVR
opal1_FF_NF	2K	MecTargetChamber/0/Opal2000/2	ioc-mec-cam05	-g 0 -c 0	su / 1,2
opal2_focus_img	4K	MecTargetChamber/0/Opal4000/2	ioc-mec-cam03	-g 0 -c 1	psu / 1,9
opal3_thomson_parabola	4K	MecTargetChamber/0/Opal4000/4	ioc-mec-cam05	-g 0 -c 1	psu / 1,9
opal4_electron_spectrometer	2K	MecTargetChamber/0/Opal2000/3	ioc-mec-cam03	-g 0 -c 0	psu / 1.9
opal7_timetool	4K	MecTargetChamber/0/Opal4000/3	ioc-mec-cam04	-g 0 -c 1	su / 1,2

Camera Name	Type	Command	Host	Hardware	Flags/EVR
epix100a_0_XRTS	epix100a	/epix100a -d MecTargetChamber -i 0 -P 0x10 -G -T -R 0 -D 0x1770	ioc-mec-cam01		psu
epix100a_1_IXS	epix100a	/epix100a -d MecTargetChamber -i 1 -P 0x20 -G -T -R 0 -D 0x1770	ioc-mec-cam01		psu
Zyla_xray_east	zyla	/zyla -c 0 -i "MecTargetChamber/0/Zyla/0"	ioc-mec-cam02	-c 0	sux / 1,10

1

2

3

A

To PR60

To Mezz

To PR6015 - Slot 1

Note: #2 covered by electrical tape

B

To R64A42-S1

*** Not fiber connectors ***

To PR6016 - S1

1

2

3

A

To R6032-S3

R62 EL44

R62E44S3

B

To R6032-S3

Note: #2 covered by electrical tape

*** Quads ***

*** Empty ***

Host	Card	Connection to R60 Patch Panel	Connection to PR60 Patch Panel	Camera
ioc-mec-cam03	Left (reversed: -c 1)	A3 #4	B1 #4	opal2_focus_img
ioc-mec-cam03	Right (reversed:-c 0)	A1 #1	A1 #1	opal4_electron_spectrometer
ioc-mec-cam04	Left (-c 0)	A1 #4	A1 #4	opal7_time_tool
ioc-mec-cam04	Right (-c 1)	B3 #1
ioc-mec-cam05	Left (-c 0)	A3 #6	B1 #6	opal1_FF_NF
ioc-mec-cam05	Right (-c 1)	A3 #1	B1 #1	opal3_thomson_parabola