You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Preferred development workflow with git repository:

  • Create new development branch for work in personal clone of repo
  • Do work and test
  • Merge in any recent changes from main branch
  • Push changes to github
  • Generate pull request on github, Glen to evaluate code changes and merge with main branch and push to production
  • Delete development branch

Generic tasks/ideas

TaskStatusAssigned ByActively Worked on by...
Full lists of PVs used in HLAs accessible from each help menu
Glen
Complete documentation for each HLA & generic controls/modeling interface
Glen
Remove remaining dependencies on legacy Matlab2012 & "matlab model" code
Glen
Remove instances of direct use of LabCA - move everything over to using PV class in readiness for implementation of PVANeeds doing by mid-2023?Glen
Faster list-based caget operations in PV class (speed up LiveModel initialization)
Glen
Implement asyn operations when move to >Matlab2021
Glen
Extend matlab server model to facet-srv01
Glen

F2_Orbit

TaskStatusAssigned ByActively Worked on by...
Plotted orbit doesn't respect pre-selected BPM list when loading a Config with pre-measured BPM data
Glen
Indicate TRIM operation in progress by grey-out of "Do correction" button or similar
Glen
Make MIA tab functionality work
Glen
"Plot all" option doesn't work correctly when displaying corrected orbit after performing orbit correction calc
Glen
Re-instate some auto dispersion correct functionality (e.g. DL10 correction with Q10731)
Glen
Add kick and dispersion source fit functionality to orbit and dispersion tabs
Glen
Changing fit location should update plot and fit data- currently doesn't work
Glen
Link reference orbit saved to Python bpm orbit tool reference saves
Glen
Implement TMIT cuts for BPM orbit
Glen

F2_LEM

TaskStatusAssigned ByActively Worked on by...
Store design L1,L2,L3 operating phases in EPICS PVs
Glen
Watcher version of LEM: info on when LEM needed etc + interface with CUD
Glen
Ignore CQ's & SQ's for purposes of Twiss parameter propagation (BMAG plot)
Glen
Make a way to flag "Matching Quads" and deal with them differently when "LEM to model"?
Glen
Fix BACT=0 causing "NaN"'s in BMAG propogation
Glen

F2_Matching

TaskStatusAssigned ByActively Worked on by...
On Multi-Wire matching tabs, wire names don't change when reading in data from different Linac section
Glen
Keep last vals in MW tab when switch back from other tab
Glen
Auto de-select CQ & SQ magnets from matching options
Glen
Add native quad scan functionality
Glen

F2_Feedback

TaskStatusAssigned ByActively Worked on by...
Jitter button ON/OFF status not working properly
Glen
DL10 controller name "IN10"→"LI10" on GUI
Glen
Settings GUI plot to include line showing feedback desired offset value
Glen
Fix freezing of GUI when closing settings panels
Glen
Tie DL10 feedback stpoint directly to LLRF control → switch off "slow fb" on RF controller when feedback on and vice-versa, increase feedback gain
Glen
Implement full PID controller coefficients to each feedback, setup and test and include P or PID as option (at least for DL10)
Glen
Implement use of LI17 fast phase shifters for BC20 feedback through SCP multiknob controls
Glen
Auto-adjust gains for changes in beam rate
Glen
Add FFS transverse feedback
Glen

MDL_FeedForward

TaskStatusAssigned byActively Worked on by...
Data collection: have watcher record each GOLD entry and associated data and save to disk
Glen
Make user-facing configuration GUI to examine training data & evaluate performance & tune NN or linear models or manually tweak
Glen

Wirescanner

TaskStatusAssigned byActively Worked on by...
User access to PMT timing & gate widths
Glen
When selecting motor position units option- propagate changes to plot to see centroid of scan in motor units


  • No labels