You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 22 Next »

The detector locations within the target chamber are marked on this diagram:

Detector NumberTypeFunctionIn DAQ?NotesCabled?Running?Comments
1ePix100aXRTSYesin-vacNW flangerYesePix 0
2ePix100aXTCSYesin-vac


3ePix10kXRDYesin-vac


4opal 4Ke- spectrometerYesin-air

Install between X455 and X523
5opal 4KThomson ParabolaYesin-air

Install between X455 and X523.
6opal 2KNF/FFYesin-airYesYes

opal1_nf_ff

Replaced 1K with 2K.

7opal 4KImaging spotYesin-air

Yes

Yesopal2_focus_img
8opal 4KTime ToolYesin-airYesYes
9ZylaMXIYesin-airYesYeszyla_xray_east
10gigE POE

replacement for GIGE4

Noin-air, using old GIGE-MEC-CAM08 (Mako G-032B POE)YesYes

Now known as the beamline camera "XRay_Imaging"

11gigE POESPL_TC_alignmentNoin-air, using old GIGE-MEC-CAM07 (Mako G-032B POE)YesYesIt does run well. From time to time, it 'freezes' such that we have to start/stop again. Nothing serious. The camera works well for its purpose! 
12gigE POE

1st alignment camera


Noin-air, Mako G-032B POE, TBD for wire alignment

Do we still need this?
13gigE POE

2nd alignment camera

Noin-air, Mako G-032B POE, TBD for wire alignment

Do we still need this?
14contactless probe

alignment

Noin-vac, TBD, need only the laptop to be accessible remotely

Do we still need this?
  • No labels