The detector locations within the target chamber are marked on this diagram:
Detector Number | Type | Function | In DAQ? | Notes | Cabled? | Running? | Comments |
---|---|---|---|---|---|---|---|
1 | ePix100a | XRTS | Yes | in-vac | |||
2 | ePix100a | XTCS | Yes | in-vac | |||
3 | ePix10k | XRD | Yes | in-vac | |||
4 | opal 4K | e- spectrometer | Yes | in-air | |||
5 | opal 4K | Thomson Parabola | Yes | in-air | |||
6 | opal 1K | NF/FF | Yes | in-air | |||
7 | opal 4K | Imaging spot | Yes | in-air | |||
8 | opal 4K | Time Tool | Yes | in-air | |||
9 | Zyla | MXI | Yes | in-air | |||
10 | gigE POE | replacement for GIGE4 | No | in-air, Mako | |||
11 | gigE POE | SPL_TC_alignment | No | in-air, using old GIGE-MEC-CAM07 (Mako G-032B POE) | Yes | Yes | It does run well. From time to time, it 'freezes' such that we have to start/stop again. Nothing serious. The camera works well for its purpose! |
12 | gigE POE | 1st alignment camera Do we need this? | No | in-air, Mako G-032B POE, TBD for wire alignment | |||
13 | gigE POE | 2nd alignment camera Do we need this? | No | in-air, Mako G-032B POE, TBD for wire alignment | |||
14 | contactless probe | alignment Do we need this? | No | in-vac, TBD, need only the laptop to be accessible remotely |