You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Current »
Internal triggers
In order to perform internal trigger one has to perform the following configurations using the Rogue GUI interface
- Set the auto trigger period
- If enabled, disable the PgpTrigEn (it will prevent auto, or external triggers to be issued)
- Enable RunTriggerEnable AND AutoRunEn
- At this point the internal counters start and after a initialization of 2x the AutoTriggerPeriod the run triggers start being issued)
- One the camera is thermally stable, enable the AutDatEn AND DaqTriggerEnable to start issuing DaqTriggers
- At this point the DataSend command will also be issued allow the camera to send the image data out
Login that enables the auto trigger control lines
![](/download/attachments/349289279/image2022-6-22_9-29-40.png?version=1&modificationDate=1655915563000&api=v2)
Logic that control which trigger signals will be issued to the Application (beyond the Trigger Module)
![](/download/attachments/349289279/image2022-6-22_9-30-5.png?version=1&modificationDate=1655915563000&api=v2)
Rogue based GUI used to configure the AutoTrigger
![](/download/thumbnails/349289279/image2022-6-22_9-28-46.png?version=1&modificationDate=1655915563000&api=v2)
Simulation of the auto trigger and the
![](/download/attachments/349289279/image2022-6-22_9-18-54.png?version=1&modificationDate=1655915563000&api=v2)