You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Procedure to start up and align the IR laser in the laser room.

Assumption is that the oscillator and Regen are running.


Preparations


  1. Check status of chillers and refill if necessary:
    1. Outside: Regen
    2. Inside: MPA crystal, Oscillator etc.
    3. Chiller load for SAGAs: https://docs.google.com/document/d/1tVj5wvT-RQI_wx3ykWPv121MkaEuvCQ05LFtRqwuRRc/
  2. Check for any other alarms. Regen and oscillator running.
  3. Check beam out of MPA is blocked with power meter

Start up/warm up


  1. Turn on PreAmp (Flashlamp and Q-Switch)
  2. Turn on both SAGAs (shutters closed)

Alignment


  1. Open auto align GUI (facet home → Matlab GUIs → S20 Laser Tools → S20 Laser Auto Alignment)
  2. Open S20 Laser Room Multi Profile Monitor (facet home → Matlab GUIs → S20 Laser Tools → S20 Laser Room Multi Profile Monitor)
  • No labels