Introduction/Setup Description
The EDC screen mount holds two screens in a W-shaped holder. The setup is mounted on a horizontal and vertical stage (both motorized UTS stages).
For the beam time Aug 10-15 2021, both screens were DRZ standard.
The screen is imaged via a mirror by a Mako G125-B with a Xmm lens that sits outside of the EDC at a window port.
Camera will be replaced by a Manta G895-B.
Motor positions
Current OUT position is 100 in vertical and 105 in horizontal
Current IN position is 50 in horizontal. To see the main beam 0 in vertical. To clear the beam just about by a few mm 10 in vertical.
Camera triggers
The camera triggers are the same as for the dump table in general.
Find them here: