Search/Navigation:
Related:
SLAC/EPP/HPS Public
Jefferson Lab/Hall B/HPS Run Wiki
S30XL-LESA/LDMX
Fibers were tested in fixed locations on the RTM. To ensure that things are working as expected from this table, they should be placed in the same locations on the RTM according to the 2021 mapping.
Fiber / RTM combination | Status |
---|---|
A | OK |
B | OK |
C | OK |
D | OK |
E | OK |
F | OK |
G | OK |
H | OK |
QA of Flange Board ↔ FE0Bs
FEB | FEB SN | Flange Board (HW) | Flange Channel | I At Boot (AnaN, AnaP, Digi) | I Mod ON | I Mod ON + Config | Ctrl Ch (dpm / ch) (1 is top cob) | Fiber (ctrl / Data) | jTag OK | Feb Address | Data Taking | Comment |
---|---|---|---|---|---|---|---|---|---|---|---|---|
L0-1t | 12 | 2 | 2 | 0.242 - 1.212 - 1.250 | 0.292 - 2.317 - 1.392 | 0.292 - 2.833 - 1.322 | 0 / 3 | D / H | Y | 0 | OK | |
L2-3t | 17 | 3 | 0 | 0.256 - 1.248 - 1.239 | 0.317 - 2.319 - 1.314 | 0.313 - 3.112 - 1.313 | 0 / 8 | D / H | Y | 2 | OK | |
L5t | 05 | 0 | 0 | 0.236 - 1.216 - 1.287 | 0.272 - 2.101 - 1.334 | 0.271 - 2.715 - 1.334 | 1 / 5 | A / E | Y | 6 | OK | |
L6t | 16 | 0 | 1 | 0.249 - 1.222 - 1.362 | 0.313 - 2.743 - 1.434 | 0.308 - 3.539 - 1.434 | 1 / 4 | A / E | Y | 8 | OK | |
L4b ( In EPICS is L4t) | 08 | 2 | 1 | 0.248 - 1.241 - 1.248 | 0 / 4 | C / G | Y | 5 | OK | Only 2 HV pins on one hybrid (instead of 4) | ||
L4t ( In EPICS is L4b) | 11 | 1 | 0 | 0.252 1.153 1.374 | 0.307 - 2.8755 - 1.448 | 0.304 - 3.564 - 1.449 | 1 / 8 | B / F | Y | 4 | OK | |
L5b | 20 | 1 | 1 | 0.246 - 1.169 - 1.243 | 0.306 - 2.242 - 1.346 | 0.302 - 3.063 - 1.321 | 1 / 7 | B / F | Y | 7 | OK | |
L6b | 04 | 1 | 2 | 0.248-1.199-1.278 | 0.307 - 2.705 -1.345 | 0.304 - 3.525 - 1.348 | 1 / 6 | B / F | Y | 9 | OK | |
L0-1b | 07 | 2 | 0 | 0.241 - 1.284 - 1.313 | 0.293 - 2.235 - 1.394 | 0.293 - 2.931 - 1.394 | 0 / 5 | C / G | Y | 1 | OK | |
L2-3b | 01 | 3 | 1 | 0.220 - 1.330 - 1.388 | 0.311 - 2.452 - 1.456 | 0.305 - 3.286 - 1.456 | 0 / 7 | D / H | Y | 3 | OK |
List of issues we observed during local data taking relative to the Back - End.
NOTICE!!! The dpm numbers in the daq map after 7 are off by one. Example: DataDpm[13] in the DAQ Map is hostname dpm14.
Server machines: clonfarm1, clon10new
TiCrate: hdel1
COBS: dpm0 : dpm6, dpm7, dtm1
dpm8 : dpm15, dpm15, dtm2
SVT software is installed in
source /usr/clas12/release/1.4.0/slac_svt_new/anaconda3/etc/profile.d/conda.sh conda activate rogue_5.9.2