Search/Navigation:
Related:
SLAC/EPP/HPS Public
Jefferson Lab/Hall B/HPS Run Wiki
S30XL-LESA/LDMX
Fibers were tested in fixed locations on the RTM. To ensure that things are working as expected from this table, they should be placed in the same locations on the RTM according to the 2021 mapping.
Fiber | Status |
---|---|
A | OK |
B | OK |
C | OK |
D | OK |
E | |
F | |
G | |
H |
QA of Flange Board ↔ FE0Bs
FEB | Flange Board (HW) | Flange Channel | I At Boot (AnaN, AnaP, Digi) | I Mod ON | I Mod ON + Config | Ctrl Ch (dpm / ch) (1 is top cob) | Fiber (ctrl / Data) | jTag OK | Feb Address | Comment |
---|---|---|---|---|---|---|---|---|---|---|
L0-1t | 2 | 2 | 0.242 - 1.212 - 1.250 | 0 / 3 | D / H | Y | 0 | |||
L2-3t | 3 | 0 | 0.256 - 1.248 - 1.239 | 0 / 8 | D / H | Y | 2 | |||
L5t | 0 | 0 | 0.236 - 1.216 - 1.287 | 0.272 - 2.101 - 1.334 | 0.271 - 2.715 - 1.334 | 1 / 5 | A / E | Y | 6 | |
L6t | 0 | 1 | 0.249 - 1.222 - 1.362 | 0.313 - 2.743 - 1.434 | 0.308 - 3.539 - 1.434 | 1 / 4 | A / E | Y | 8 | |
L4b ( In EPICS is L4t) | 2 | 1 | 0.248 - 1.241 - 1.248 | 0 / 4 | C / G | Y | 5 | |||
L4t ( In EPICS is L4b) | 1 | 0 | 0.252 1.153 1.374 | 0.307 - 2.8755 - 1.448 | 0.304 - 3.564 - 1.449 | 1 / 8 | B / F | Y | 4 | |
L5b | 1 | 1 | 0.246 - 1.169 - 1.243 | 0.306 - 2.242 - 1.346 | 0.302 - 3.063 - 1.321 | 1 / 7 | B / F | Y | 7 | Hybrid 1 and Hybrid 3 give check transaction errors at the power up. Those correspond to Ly6 hybrids in the test setup. |
L6b | 1 | 2 | 0.248-1.199-1.278 | 0.307 - 2.705 -1.345 | 0.304 - 3.525 - 1.348 | 1 / 6 | B / F | Y | 9 | |
L0-1b | 2 | 0 | 0.241 - 1.284 - 1.313 | 0 / 5 | C / G | Y | 1 | |||
L2-3b | 3 | 1 | 0.248 - 1.122 - 1.195 | 0 / 7 | D / H | Y | 3 |