You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 71 Next »

 

General Info

Documents

Software

 

ECAL Calibration Tasks

  • Alignment
    • based on survey
    • based on tracking
  • Energy
    • Gains
      • FEE
        • absolute
        • dedicated FEE runs and singles triggers
      • Møllers and WABs
        • absolute
        • 4.4 GeV and positron trigger should greatly reduce their statistics/usefulness
        • singles and old-pair triggers may help
      • Cosmics
        • relative, before and after the run
      • LED
        • relative, before and during the run
    • Edge corrections
      • based on tracks' y-intercept at ECAL relative to ECAL y-edge
  • Time
    • channel offsets
    • time-walk
    • RF
      • signal shape is different relative to 2016
      • potentially more important for positron/singles triggers than for pairs

HODO Calibration Tasks

  • Gains
    • Calculated several time throughout the run, in the database
    • Observed dependence on luminosity, and a tiny bit on time
    • For production runs, a single run from every day (few days) can be used to calculate gains
    • For low-luminosity runs, a single run can be used to calibrate  each
    • About 15-20 file will be needed
    • Format? Either hpstr/DST with hodo information should be available, or I have a simple ntuple that gives necessary information
  • TIme
    • Currently hit time is defined as a threshold crossing time, should we use mode-7 timing algorithm?
  • Alignment
    • Hodo acceptance is covering all the ECal/SVT acceptance
    • Efficiency studies during the run didn't show any efficiency loss close to edges of the calorimeter.

Software Tasks

  • Adding HODO to particle objects
    • time/position-coincidence with ECAL
  • Validating RF extraction

Meeting Agendas/Minutes

October 1, 2019

  • No labels