The following is currently stored in the EEL at JLab

  • Black module transport box with L1-L3 half-modules 18, 11, 4
  • Unlabeled L4-L6 half-module. 
  • Motor
  • Flange stand-offs 
  • x2 Dial indicator
  • U-channel tool 
  • x2 Target tool?
  • SVT drawings book
  • Cooling line feedthoughs
  • x7 SAS cables
  • Tflex (for feb)
  • Spare FEB plate?
  • Spare SVT data flange
  • ATCA crate power supply
  • 3x ATCA crate front plate
  • L4-6 hybrid to FEB cable (2,5,7)
  • MPT12 fiber
  • Test HV mez wire
  • x2 Dual fiber
  • Power supply to FEB cable
  • 3x Cross over board to L1-L3 cables
  • Test LV Mez card
  • Fiber breakout box
  • Foam insulation tape
  • x2 rods
  • cross-over board.
  • Sho's looooooog copper cooling line 
  • x1.5 alcohol wipes 
  • 18x small vac compatible zip ties (blue)
  • .5x medium vac compatible zip ties (blue)
  • x1 mounting bases for zip ties (7 left)
  • 1 thick roll and 3 small rolls of kapton tape
  • 5 plastic cups
  • 2x large 1x medium gloves 
  • 1x heavy duty cable ties 
  • 1x long cable ties 
  • several mask and arm sleves
  • 3x packs of wipes 
  • 2x packages of zip ties 
  • 1x UHV foil 
  • screws for vac flanges 
  • 6 gaskets for flanges 
  • 8 gaskets for feb cooling 
  • Thermal compound with exp date of 2014/01/05 
  • Cooling line fittings and adapters 
  • LED crimper
  • Kapton sheet 
  • V & flat mounts
  • vented 4-40
  • Lots of other screws ...
  • ball mounts
  • peek screws 
  • Tools 
  • Borescope 

 

 

  • No labels