Search/Navigation:
Related:
SLAC/EPP/HPS Public
Jefferson Lab/Hall B/HPS Run Wiki
S30XL-LESA/LDMX
Basic info:
Setup of RCE bootloader for diskless booting: (based on this page)
ssh (or minicom via usb) to DTM (192.168.2.221)
minicom bay<bay>.<RCE> (bay is 0-3 <4 is the DTM> and RCE is 0 or 2 <NOT 1>)
From rdusr219 (with SDK env): cob_rce_reset 192.168.1.254/2/<bay>/<RCE>
Interrupt boot sequence by pressing any key in minicom
Apply the default u-boot environment:
zynq-uboot> env default -a
zynq-uboot> setenv modeboot nfsboot
zynq-uboot> setenv bootdelay 3
zynq-uboot> saveenv
zynq-uboot> reset
In order to down/upload to github, set up a tunnel between rhel6-64 and rdusr219. See Proto-DUNE: How to setup a temporary tunnel for github for a recipe.
The HPS RCEs boot in "diskless mode" via NFS. For info about this, see RCE Diskless Node (NFS).
TO DO:
Install RCE NFS boot from scratch with rdusr219 as nfs host (3 bays finished)
Understand what is needed to setup local runs w/o CODA
Discuss logging and hostnames with Sergio
Procure STAK 3 cable to power VME crate and connect into local network