2019 DAQ: SLAC Teststand Setup

Basic info: 

• ATCA shelf and COB connected to:  rdusr219
• Shelf name, IP: lbne1_0102,192.168.1.254
• RCE SDK path:  /afs/slac.stanford.edu/g/cci/volumes/vol1/sdimages/sdk/V3.2.0
• RCE Soft/Firmware path:  /u1/hps/heavy-photon-daq
  • https://github.com/slaclab/heavy-photon-daq/releases/tag/release-4.1-run2016
• The HPS COB is in ATCA slot #2; slot #1 is used by other groups.  

In order to down/upload to github, set up a tunnel between rhel6-64 and rdusr219.  See Proto-DUNE: How to setup a temporary tunnel for github for a recipe.  

The HPS RCEs boot in "diskless mode" via NFS.  For info about this, see RCE Diskless Node (NFS).

TO DO:

Install RCE NFS boot from scratch with rdusr219 as nfs host

Install VME crate for TI controller in rack (VME already moved next to the crate)